Preparation and Characterization of ZrO2/TiO2 Nanocomposite under Ultrasonic Irradiation by Sol-gel Route

Authors: not saved
Abstract:

TiO2/ZrO2 nanocomposite was obtained by the sonochemical technique. In this method, two separate gels containing zirconium and titanium were prepared and mixed together. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4. The precursor titanium tetra isopropoxide (TTIP) dissolved in isopropanol. Mixing of Titanium and Zirconium gels was resulted in a yellow TiO2/ZrO2 gel. The precipitate was calcinated in the furnace. The obtained nanopowder characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and Fourier transform infra-red spectroscopy (FT-IR).

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Preparation and Characterization of ZrO2/ZnO Nanocomposite under Ultrasonic Irradiation via Sol-gel Route

Nanocomposite of ZrO2/ZnO was prepared under ultrasonic irradiation by sol gel process from directly mixing Zirconium and Zinc gels, and the mixture was placed under ultrasonic irradiation for 2 hours then aging time the filtrated composite gel was calcinated at 500°C for 3h in furnace. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4 and zinc acetate dihydrated was...

full text

Preparation and Characterization of ZrO2/ZnO Nanocomposite under Ultrasonic Irradiation via Sol-gel Route

Nanocomposite of ZrO2/ZnO was prepared under ultrasonic irradiation by sol gel process from directly mixing Zirconium and Zinc gels, and the mixture was placed under ultrasonic irradiation for 2 hours then aging time the filtrated composite gel was calcinated at 500°C for 3h in furnace. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4 and zinc acetate dihydrated was...

full text

preparation and characterization of zro2/tio2 nanocomposite under ultrasonic irradiation by sol-gel route

tio2/zro2 nanocomposite was obtained by the sonochemical technique. in this method, two separate gels containing zirconium and titanium were prepared and mixed together. the precursor sol of zirconium was prepared from an aqueous solution of zrcl4. the precursor titanium tetra isopropoxide (ttip) dissolved in isopropanol. mixing of titanium and zirconium gels was resulted in a yellow tio2/zro2 ...

full text

preparation and characterization of zro2/zno nanocomposite under ultrasonic irradiation via sol-gel route

nanocomposite of zro2/zno was prepared under ultrasonic irradiation by sol gel process from directly mixing zirconium and zinc gels, and the mixture was placed under ultrasonic irradiation for 2 hours then aging time the filtrated composite gel was calcinated at 500°c for 3h in furnace. the precursor sol of zirconium was prepared from an aqueous solution of zrcl4 and zinc acetate dihydrated was...

full text

PREPARATION AND CHARACTERIZATION OF TiO2 Fe2O3 NANOCOMPOSITE BY SOL GEL METHOD

Nanocomposites have improved aspect ratio and better mechanical properties when compared to the composites which had structures less than 100nm They are 1000 times tougher compared to conventional composites. Besides mechanical properties, nanocomposites also have improved electrical conductivity, thermal stability, chemically resistant, flame retardant and low permeability. TiO2 finds its best...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 3  issue 3

pages  175- 178

publication date 2014-10-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023