Prediction of Work-Piece Constitutive Equation in Hot Rolling of Strip
Authors
Abstract:
Dimensional control of the work-piece in steel industry is of important interest. The main aspects in overcoming the thickness control are variations in material strength due to variations in chemical composition, work-piece temperature, reduction and the strain rate applied to the work-piece. In this paper based on the main parameters affecting the rolling force an attempt been made to give a more accurate prediction for the flow stress in a steel rolling finishing mill. Predicted values of the model are compared with those of the experimental values which are shown to be in good agreements
similar resources
Prediction of Work Roll Initial Crown according to Desired Strip Profile in Hot Rolling
The final hot strip profile is a superposition of the roll initial crown, the roll bending and flattening crown, the roll wearing crown and the roll thermal crown. In this research, linear regression models are proposed to predict the roll force, the roll wearing crown and the roll thermal crown using experimental data provided by Mobarake Steel Complex (MSC). The short beam theory based on ela...
full textPrediction of Work Roll Initial Crown According to Desired Strip Profile in Hot Rolling
The final hot strip profile is a superposition of the roll initial crown, the roll bending and flattening crown, the roll wearing crown and the roll thermal crown. In this research, linear regression models are proposed to predict the roll force, the roll wearing crown and the roll thermal crown using experimental data provided by Mobarake Steel Complex (MSC). The Euler-Bernoulli beam theory ba...
full textCoiler Control in Endless Hot Strip Rolling
JFE Steel Corporation’s East Japan Works (Chiba District) started operation of No.3 Hot Strip Mill in 1995. This line was the first in the world to achieve “endless hot strip rolling.” A new Coiler Control technology was developed. Copyright 2005 IFAC
full textOptimum Work Roll Profile Selection in the Hot Rolling of Wide Steel Strip Using Computational Intelligence
The finishing train of a hot strip mill has been modelled by using a constant volume element model. The accuracy of the model has been increased by using an Artificial Neural Network (ANN). A non-linear Rank Based Genetic Algorithm has been developed for the optimization of the work roll profiles in the finishing stands of the simulated hot strip mill. It has been compared with eight other expe...
full textRolling conditions in hot strip mills and their influence on the performance of work rolls
The mechanical rolling conditions in hot strip mills are precisely defined by various variables, which are taken directly froth the rolling schedule (separation force, torque. speed. strip thickness) or calculated from figures of the rolling schedule and dimensions of the mill (strip reduction, roll diameter etc.). These variables allow to describe the mechanical rolling conditions of all passe...
full textEffect of Composition on the Recrystallization Behavior of if Steels During Simulated Hot Strip Rolling
Flow curves are generated in muti-pass torsion tests for a titanium stabilized and a niobium stabilized IF steel. Two types of test schedule are used, one based on plate rolling and the other approximating strip rolling. The purpose of the former is to define the three critical temperatures of steel rolling. The strip schedules are varied in order to investigate the influence of increasing the ...
full textMy Resources
Journal title
volume 1 issue 4
pages 77- 84
publication date 2008-12-21
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023