Prediction of Kinematic Viscosity of Petroleum Fractions Using Artificial Neural Networks

Authors

  • Hossein Parhizgar Young Researchers and Elites Club, Marvdasht Branch, Islamic Azad University, Marvdasht, Iran
  • Mohammad Reza Dehghani Thermodynamics Research Laboratory, School of Chemical Engineering, Iran University of Science & Technology, Narmak, Tehran, Iran
Abstract:

In this work, artificial neural network (ANN) was utilized to develop a new model for the prediction of the kinematic viscosity of petroleum fractions. This model was generated as a function of temperature (T), normal boiling point temperature (Tb), and specific gravity (S). In order to develop the new model, different architectures of feed-forward type were examined. Finally, the optimum structure with three hidden layers was selected. The optimum structure had five, four, and two neurons in the first, second, and third layers respectively. To prevent over-fitting problem, 70% of the experimental data were used to train and validate the new model and the remaining data which did not participate in learning process was utilized to test the ability of the new model for the prediction of the kinematic viscosity of petroleum fractions. The results showed that the predicted/calculated and experimental data are in good agreement. The average absolute relative deviation (AARD) of the new model was 1.3%. Finally, the results were compared with an Eyring-based model (Soltani et al.’s work); it was shown that, based on the reported results by the authors, the accuracy of both model were in the same order.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

prediction of kinematic viscosity of petroleum fractions using artificial neural networks

in this work, artificial neural network (ann) was utilized to develop a new model for the predictionof the kinematic viscosity of petroleum fractions. this model was generated as a function oftemperature (t), normal boiling point temperature (tb), and specific gravity (s). in order to developthe new model, different architectures of feed-forward type were examined. finally, the optimumstructure...

full text

scour modeling piles of kambuzia industrial city bridge using hec-ras and artificial neural network

today, scouring is one of the important topics in the river and coastal engineering so that the most destruction in the bridges is occurred due to this phenomenon. whereas the bridges are assumed as the most important connecting structures in the communications roads in the country and their importance is doubled while floodwater, thus exact design and maintenance thereof is very crucial. f...

Prediction of Kinematic Viscosity of Binary Mixture of Poly (Ethylene Glycol) in Water using Artificial Neural Networks

An artificial neural network (ANN) model is presented for the prediction of kinematic viscosity of binary mixtures of poly (ethylene glycol) (PEG) in water as a function of temperature, number-average molecular weight and mass fraction. Kinematic viscosities data of aqueous solutions for PEG (0.55419×10 – 9.875×10 m2/s) were obtained from the literature for a wide range of temperatures (277.15 ...

full text

Prediction of recovery of gold thiosulfate on activated carbon using artificial neural networks

Since a high toxicity of cyanide which use as a reagent in the gold processing plant, thiosulfate has been recognized as a environmental friendly reagent for leaching of gold from ore. After gold leaching process it's important for recovery of gold from solution using adsorption or extraction methods, One of these methods is activated carbon.The loading of gold from industrial thiosulfate solut...

full text

Prediction of the deformation modulus of rock masses using Artificial Neural Networks and Regression methods

Static deformation modulus is recognized as one of the most important parameters governing the behavior of rock masses. Predictive models for the mechanical properties of rock masses have been used in rock engineering because direct measurement of the properties is difficult due to time and cost constraints. In this method the deformation modulus is estimated indirectly from classification syst...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 3  issue 2

pages  51- 65

publication date 2014-04-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023