Polyacrylamide Gel Polymer as Water Shut-off System: Preparation and Investigation of Physical and Chemical Properties in One of the Iranian Oil Reservoirs Conditions

Authors

  • Ahmad Dadvand Koohi Oil, Gas and Thermodynamic Research Group, Tarbiat Modares University, Tehran, I.R. IRAN
  • Mohammad Simjoo Oil, Gas and Thermodynamic Research Group, Tarbiat Modares University, Tehran, I.R. IRAN
  • Mohsen Vafaie Sefti Oil, Gas and Thermodynamic Research Group, Tarbiat Modares University, Tehran, I.R. IRAN
  • Reza Hasheminasab Oil, Gas and Thermodynamic Research Group, Tarbiat Modares University, Tehran, I.R. IRAN
  • Valiahmad Sajadian RIPI/NIOC, Arvandan Company, Tehran, I.R. IRAN
Abstract:

In this paper, polyacrylamide/chromium acetate gel polymer system was prepared as water shut-off system to control water production in one of the Iranian oil reservoirs condition. Effect of various parameters such as temperature (90 °C) and water formation from view point of salinity and divalent cations, was evaluated on the gelation kinetic and gel strength using bottle testing method. The results showed that the increase of temperature caused a decrease in the gelation time. Also, presence of divalent cations in formation water, decreased gelation time and by precipitation could cause instability in gel structure.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

polyacrylamide gel polymer as water shut-off system: preparation and investigation of physical and chemical properties in one of the iranian oil reservoirs conditions

in this paper, polyacrylamide/chromium acetate gel polymer system was prepared as water shut-off system to control water production in one of the iranian oil reservoirs condition. effect of various parameters such as temperature (90 °c) and water formation from view point of salinity and divalent cations, was evaluated on the gelation kinetic and gel strength using bottle testing method. the re...

full text

investigation of the electronic properties of carbon and iii-v nanotubes

boron nitride semiconducting zigzag swcnt, $b_{cb}$$n_{cn}$$c_{1-cb-cn}$, as a potential candidate for making nanoelectronic devices was examined. in contrast to the previous dft calculations, wherein just one boron and nitrogen doping configuration have been considered, here for the average over all possible configurations, density of states (dos) was calculated in terms of boron and nitrogen ...

15 صفحه اول

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 26  issue 4

pages  99- 108

publication date 2007-12-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023