Photocatalytic oxidation of an organophosphorus simulant of chemical warfare agent by modified TiO2 nanophotocatalysts
author
Abstract:
TiO2 nanoparticles, as a photocatalyst for oxidation of dimethyl methylphosphonate (DMMP) as an organophosphorus simulant of chemical warfare agent, were prepared by using sol-gel method. The prepared nanoparticles were then modified with transition metals in order to decrease the electron-hole recombination and increase the photocatalytic activity. Transition metal ions including Pt, Pd and Ni were used for this purpose. The prepared samples were characterized by different analysis methods, and Photocatalytic mechanism was studied over the unmodified and modified photocatalysts. The effect of some operational parameters such as catalyst dosage, initial DMMP concentration and type and amount of loading the transition metal on the photocatalytic activity was investigated. The results showed that the best photooxidation of DMMP was obtained with 1% Pd/TiO2. The optimum conditions for catalyst dosage and initial DMMP concentration were 20 g L-1 Pd and 0.138 M, respectively.
similar resources
photocatalytic oxidation of an organophosphorus simulant of chemical warfare agent by modified tio2 nanophotocatalysts
tio2 nanoparticles, as a photocatalyst for oxidation of dimethyl methylphosphonate (dmmp) as an organophosphorus simulant of chemical warfare agent, were prepared by using sol-gel method. the prepared nanoparticles were then modified with transition metals in order to decrease the electron-hole recombination and increase the photocatalytic activity. transition metal ions including pt, pd and ni...
full textPhotocatalytic degradation of an organophosphorus compound by porous Au- and WO3- modified TiO2
full text
Preparation and Utilization of MnO2 Nanoparticles (NPs) Catalyst for the Decontamination against Chemical Warfare Nerve Agent Simulant (CWNAS)
In this scientific research, MnO2 nanoparticles (NPs) have been successfully prepared by a precipitation method using KMnO4, MnSO4.H2O and H2O2 (30%) as the precursors. As-prepared sample was identified by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Infrared (IR) techniques. The transmission electron microscopy (TEM) showed 7-8 nm rang...
full textVapour breakthrough behaviour of carbon tetrachloride - a simulant for chemical warfare agent on ASZMT carbon
ASZMT (Cu, Ag, Zn, Mo, TEDA impregnated) carbon was prepared by impregnation of active carbon with ammonical salts of Cu (II), Ag (I), Zn (II), Mo (VI) and TEDA using incipient wetness technique. Thereafter, ASZMT carbon was characterized using scanning electron microscopy, atomic absorption spectroscopy, thermogravimetry and surface characterization techniques. The ASZMT carbon was evaluated u...
full textdetermination of olanzapine and thiourea using electrodes modified by dna and film of copper-cobalt hexacyanoferrate & investigation of electro-oxidation of some catechol derivatives in the presence of 4-phenylsemicarbazid
چکیده هدف از این کار بررسی الکترواکسیداسیون کتکول و مشتقات آن در حضور 4-فنیل سمی کاربامازید بوده است اکسیداسیون کتکولها ترکیبات نا پایدار کینونها را تولید می کنند که این ترکیبات می تواند در واکنش مایکل بعنوان پذیرنده نوکلئوفیل عمل نمایند. در ادامه اکسایش کتکولهای (a-c1) را درحضور 4-فنیل سمی کاربامازید در محلول آب/استونیتریل (90/10)بوسیله ولتامتری چرخه ای و کولن متری در پتانسیل ثابت مورد بررسی ...
15 صفحه اولMy Resources
Journal title
volume 6 issue 5
pages 447- 454
publication date 2016-12-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023