Photocatalytic Coating Using Titania-Silica Core/Shell Nanoparticles
Authors: not saved
Abstract:
The photocatalytic coatings were prepared via incorporating the modified titania nanoparticles into epoxy-based inorganic-organic hybrid coatings. Titania nanoparticles were first synthesized from tetra-n-butyl titanate using sol-gel methods by two different calcination treatments, i.e., in mild condition (80°C) and 500°C. The formed anatase nanoparticles were further modified as Titania-Silica (TS) core/shell structure. Characterization of the samples was carried by X-ray diffraction (XRD) analysis, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), Energy-Dispersive X-ray (EDX) spectroscopy and UV-Vis spectroscopy. The decomposition of methylene blue (MB) exhibited high photocatalytic activity for the titania nanoparticles embedded with silica phase in core/shell structure. In a comparative study using a commercial P25 titania from Evonik, the synthesized titania samples showed lower size nanoparticles and more uniform distribution of nanoparticles into hybrid binder. However, the degree of anatase crystalline was lower which results to lower photocatalytic activity.
similar resources
photocatalytic coating using titania-silica core/shell nanoparticles
the photocatalytic coatings were prepared via incorporating the modified titania nanoparticles into epoxy-based inorganic-organic hybrid coatings. titania nanoparticles were first synthesized from tetra-n-butyl titanate using sol-gel methods by two different calcination treatments, i.e., in mild condition (80°c) and 500°c. the formed anatase nanoparticles were further modified as titania-silica...
full textMulti-step Coating of Monodisperse Silica Spheres by Titania Nanoparticles Base on Electrostatic Attraction Strategy
TiO2-SiO2 core-shell particles include of monodisperse silica core and nanostructured titania shell were synthesized by a multi-step coating process. The monodisperse silica spheres were synthesized by Stöber method and titania shell was obtained of a colloidal sol prepared by a hydrolysis–condensation reaction. The titania sol was deposited on monodisperse silica spheres by a multi-step coatin...
full textLithographically directed deposition of silica nanoparticles using spin coating
Directed self-assembly is an important direction for the extension of patterning to the nanoscale regime and below. Here, examples are given of both individual particle placement and composite structure formation involving assemblies of many nanometer scale particles, both on patterned surfaces and on planar surfaces where the photoresist is used as a sacrificial layer to define the pattern and...
full textReducing ZnO nanoparticles toxicity through silica coating
ZnO NPs have good antimicrobial activity that can be utilized as agents to prevent harmful microorganism growth in food. However, the use of ZnO NPs as food additive is limited by the perceived high toxicity of ZnO NPs in many earlier toxicity studies. In this study, surface modification by silica coating was used to reduce the toxicity of ZnO NPs by significantly reducing the dissolution of th...
full textMy Resources
Journal title
volume 2 issue 3
pages 407- 422
publication date 2013-10-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023