Optimization of SiC particle distribution during compocasting of A356-SiCp composites using D-optimal experiment design
Authors
Abstract:
This paper presents an experimental design approach to the process parameter optimization for compocasting of A356-SiCp composites. Toward this end, parameters of stirring temperature, stirring time, stirring speed and SiC content were chosen and three levels of these parameters were considered. The D-optimal design of experiment (DODE) was employed for experimental design and analysis of results. In the experimental stage, different 20 µm-sized SiC particle contents (5, 10 and 15 vol %) were introduced into semisolid-state A356 aluminium alloy. Semisolid stirring was carried out at temperatures of 590, 600 and 610 °C with stirring speeds of 200, 400 and 600 rpm for 10, 20 and 30 min. The effect of these parameters on the distribution of the SiC particles within the matrix, represented by distribution factor (DF), was investigated. The smaller value of DF is indicative of the more uniform distribution of the SiC particles in the matrix. It was observed that the SiC particle content of 15 vol %, stirring temperature of 590 °C, stirring speed of 500 rpm, and stirring time of 30 min were the optimum parameter values producing the best distribution of the SiC particles in the matrix. The statistical test revealed that the main effect of the stirring temperature is the most significant factor.
similar resources
Soldering of Aluminum Matrix Composites Sicp/a356 and Kovar Alloy
Article history: Received 28.3.2013 Received in revised form 26.4.2013 Accepted 29.4.2013 Aluminum matrix composites containing 55% SiC particle reinforcing phase/SiC reinforcement phase particle and Kovar alloy 4J29 were chosen as the base metals. After nickel plating on the surface of SiCp/Al, two kinds of materials were soldered together by using Zn-Cd-Ag-Cu as the filler metal and ZnCl2 as ...
full textFormulation and Optimization of Captopril Sublingual Tablet Using D-Optimal Design Sublingual Tablet Using D-Optimal Design
The objective of the current study was to develop and optimize a sublingual tablet formulation of captopril which is an effective drug in the treatment of hypertension. Captopril containing tablets were prepared by direct compression method using different ingredients such as polyvinyl pyrrolidone, starch 1500, sodium starch glycolate and lactose (independent variables) and magnesium stearate, ...
full textFormulation and Optimization of Captopril Sublingual Tablet Using D-Optimal Design Sublingual Tablet Using D-Optimal Design
The objective of the current study was to develop and optimize a sublingual tablet formulation of captopril which is an effective drug in the treatment of hypertension. Captopril containing tablets were prepared by direct compression method using different ingredients such as polyvinyl pyrrolidone, starch 1500, sodium starch glycolate and lactose (independent variables) and magnesium stearate, ...
full textOPTIMAL DESIGN OF ARCH DAMS FOR FREQUENCY LIMITATIONS USING CHARGED SYSTEM SEARCH AND PARTICLE SWARM OPTIMIZATION
In recent years, the importance of economical considerations in the field of dam engineering has motivated many researchers to propose new methods for minimizing the cost of dames and in particular arch dams. This paper presents a method for shape optimization of double curvature arch dams corresponding to minimum construction cost while satisfying different constraints such as natural frequenc...
full textMy Resources
Journal title
volume 3 issue 3
pages 145- 154
publication date 2017-09-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023