Optimization of Coagulation and Flocculation Process in Wastewater Treatment of the Food Industry: A Laboratory Study

Authors

Abstract:

Background and Objectives: Food industry wastewater has a high pollution load, which is due to water consumption at various stages. In the absence of adequate wastewater management and supervision of the food industry, this wastewater can be considered as a source of environmental pollution. This study aimed to optimize the coagulation and flocculation process for the treatment of food industry wastewater. Materials and Methods: The present study was a laboratory study. Aluminum sulfate and poly aluminum chloride were used as coagulant and cationic poly-electrolytes C-270 and anion A-300 were used as coagulant aid. Then, the optimization of pH (4.5-10.5), coagulant concentration (300-800 mg/L) and coagulation aid (3-8 mg/L) were evaluated by calculating optimal removal efficiency of turbidity, total suspended solids and chemical oxygen demand. And the results were analyzed using Pearson’s correlation coefficient. Results: The results showed that at optimal pH (8.5), poly aluminum chloride concentration (600 mg/L) in combination with cationic poly-electrolyte C-270 (5 mg/L), removal efficiency for turbidity, TSS and COD parameters were 98.75%, 98.5%, and 82.4%, respectively. Conclusion: It can be concluded that using poly aluminum chloride as a coagulant and cationic polyelectrolyte C-270 as a coagulant aid can be used as an appropriate pretreatment for reducing the organic load for food industry sewage. Key words: Optimization, Coagulation, Food Industry, Aluminum sulfate, Poly-aluminum-chloride, Polyelectrolyte   Funding: This study was funded by Yazd University of Medical Sciences. Conflict of interest: None declared. Ethical approval: The Ethics Committee of Yazd University of Medical Sciences approved the study (IR.SSU.SPH. REC.1396.152).   How to cite this article: Zarei Mahmoudabadi T, Talebi P, Ehrampoosh MH, Jalili M. Optimization of Coagulation and Flocculation Process in Wastewater Treatment of the Food Industry: A Laboratory Study. J Rafsanjan Univ Med Sci 2019[11] ; 18 (7): 623-36. [Farsi]  [11]شماره تلفن فارسی با انگلیسی همخوانی ندارد. ظاهرا با توجه به تعداد  اعداد شماره انگلیسی صحیح است.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Paper and Cardboard Industries Wastewater Treatment by Coagulation and Flocculation Process and Optimization with Response Surface Methodology: A Laboratory Study

Background and Objectives: Wastewater treatment of paper recycling and cardboard industries with the aim of water recycling and reducing environmental impact is one of the daily needs of industries. Therefore, the aim of the present study was to optimize the conditions of coagulation and flocculation process in wastewater treatment of paper recycling industries using the response surface method...

full text

Investigating the Effect of Coagulation and Flocculation - Adsorption Process on Boron Removal from Industrial Wastewater (Case Study: Ceramic Tile Industry)

Background and Objectives: Boron is widely found in raw materials and wastewater of the tile industry and its removal from aquatic environments is very complex. The aim of this study was to remove boron from wastewater of ceramic tile industry using coagulation and flocculation-adsorption process. Materials and Methods: This was an experimental study. Initially, for the coagulation process, pH...

full text

Treatment of Synthetic Textile Wastewater by Combination of Coagulation/Flocculation Process and Electron Beam Irradiation

Introduction: Textile wastewaters from dyeing and finishing processes are heavily polluted with dyes, textile auxiliaries and chemicals and have a broad range of pH, high COD concentration and suspended particles. In this study, the efficiency of color and turbidity removal from synthetic textile wastewater samples were investigated by combined process of coagulation/ flocculation and electron ...

full text

application of brand personality scale in automobile industry: the study of samand’s brand personality dimensions

این تحقیق شخصیت برند سمند را در ایران با استفاده از مدل پنج بعدی آکر (1997) بعنوان یک چهارچوب بطور توصیفی سنجیده است. بنابر این چهارچوب که دراصل در 42 جزء (42 ویزگی شخصیتی) ودر پنج بعد شخصیتی طراحی شده بود ودر کشورها وصنایع مختلف آزموده شده بود, پرسنامه به زبان فارسی ترجمه شده و با استفاده از روشهای ترجمه معکوس و مصاحبه عمیق با 12 متخصص ایرانی به 38 جزء کاهش یافت. و نظرسنجی ای در پنج نمایندگی ا...

15 صفحه اول

Optimization of Coagulation/Flocculation for Treatment of Wastewater

One of the industrial areas in the south of Iran is Bandar Imam Petrochemical Economic Zone which has a lot of petrochemical complex, Farabi Petrochemical complex is one of those places. Coagulation/flocculation could be a typical methodology in water and wastewater treatment that a number of chemicals are added to assist the coagulation/flocculation and causes to the sedimentation. In this pap...

full text

a study on the design of bio-ethanol process from date wastes of sistan and baluchistan province

اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 18  issue 7

pages  623- 636

publication date 2019-09

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

No Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023