Optimal Placement of Remote Control Switches in Radial Distribution Network for Reliability Improvement using Particle Swarm Optimization with Sine Cosine Acceleration Coefficients

Authors

  • Amin Rastegar Pour
  • Hassan Barati
Abstract:

Abstract: One of the equipment that can help improve distribution system status today and reduce the cost of fault time is remote control switches (RCS). Finding the optimal location and number of these switches in the distribution system can be modeled with various objective functions as a nonlinear optimization problem to improve system reliability and cost. In this article, a particle swarm algorithm with sinusoidal and cosine coefficients (H-PSO-SCAC) is presented to solve the RCS locating problem in the distribution system. The simulation results were tested using H-PSO-SCAC algorithm on sample network 69 bus and with particle swarm optimization (PSO), differential search algorithm (DS), Differential evolutionary algorithm (DE), genetic algorithm (GA), ant colony optimization (ACO) and gravitational search algorithm (GSA) have been compared. The results show that the H-PSO-SCAC algorithm is better in terms of response quality and computational efficiency.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Optimal placement of switches in a radial distribution network for reliability improvement

This paper proposes differential search (DS) algorithm to solve distribution system reliability optimization problem. Optimum number and location of remote control switch (RCS) have been found, in order to enhance reliability of a radial distribution system. A multi-objective formulation has been considered with a view to enhance reliability at a compromised cost. DS algorithm utilizes the Brow...

full text

Performance Improvement of Radial Distribution Network with Distributed Generation Integration Using Extended Particle Swarm Optimization Algorithm

This paper proposes the performance improvement of radial distribution network with distributed generation (DG) integration using extended particle swarm optimization (PSO) algorithm. High-performance distribution network is a network that has a low power loss, better voltage profile, and loading balance among feeders. The effort to improve the performance of the distribution network is network...

full text

Optimal placement and sizing of distributed generation considering FACTS devices and load uncertainty using hybrid sine-cosine algorithm and particle swarm optimization (HSCA-PSO)

Using Distributed Generation (DG) in electrical distribution networks brings many advantages and thus, optimal placement and sizing of these units become important. Most of the researches in this field neglect the effect of transmission system on distribution section. These researches also ignore the effect of Flexible Alternating Current Transmission Systems (FACTS). This thesis proposes a new...

full text

OPTIMAL PLACEMENT OF SWITCHES IN DG EQUIPPED DISTRIBUTION SYSTEM by PARTICLE SWARM OPTIMIZATION

Optimal placement of switching devices is a very important for distribution networks‟ planning, operation and cost minimization. Further identifying optimal placement of switches is typical if the distribution system consists of Distributed Generators (DGs). Generally DGs are used to reduce the losses, to improve the voltage profile and to increase the reliability of the system. Further in orde...

full text

Simultaneous Placement of Capacitor and DG in Distribution Networks Using Particle Swarm Optimization Algorithm

Nowadays, using distributed generation (DG) resources, such as wind and solar, also improving the voltage profile in distribution companies has been considered. As optimal placement and sizing of shunt capacitors become more prevalent, utilities want to determine the impact of the various capacitors placement in distribution systems. Locating and determining the optimal capacity of shunt capaci...

full text

A Customer Oriented Approach for Distribution System Reliability Improvement using Optimal Distributed Generation and Switch Placement

The reliability of distribution networks is inherently low due to their radial nature, consequently distribution companies (DisCos) usually seek to improve the system reliability indices with the minimum possible investment cost. This can be known as system-oriented reliability planning (SORP). However, there can exist some customers that are not satisfied by their reliability determined by ado...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 7  issue 1

pages  27- 34

publication date 2018-09

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023