One Step Rapid Synthesis of Nano-Crystalline ZnO by Microwave-Assisted Solution Combustion Method
Authors
Abstract:
In this study nano-crystalline ZnO particles were synthesized by microwave-assisted solution combustion method. Zinc nitrate and urea were used as oxidizer and fuel, respectively. The effect of fuel to oxidizer (F/O) ratio on ZnO powder properties was investigated by using different urea/nitrate ratios. X-ray diffractometer, scanning electron microscopy and fourier transform infra-red were used in powders characterization. The results showed that under microwave radiation the pure ZnO phase was formed after combustion reaction with different F/O ratios. The crystallite size was calculated in the range of 28-32 nm using Scherrers equation. The result has shown that F/O ratio variation influenced the particle morphology from pyramid structure to partially sintered spherical.
similar resources
Effect of various fuels on structure and photo-catalytic activity of TiO2 nano-crystalline prepared by microwave-assisted combustion method
Nano-crystalline TiO2 were synthesized by combustion method using metal nitrate solution and urea, glycin and citric acid fuels. Microwave irradiation was used as heating source. X-ray diffraction, scanning electron microscope as well as Fourier transform infrared spectroscopy were performed to characterize the obtained samples. X-ray diffraction patterns revealed that in the case of citric aci...
full textMicrowave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics
Tungsten oxide (WO3) and tungsten oxide hydrate (WO3.H2O) nanoparticles were synthesized via microwave-assisted solution combustion in comparison with the acidic precipitation method. Oxalic acid was used as a surfactant and forming agent in the acidic precipitation method. In addition to oxalic acid, glycine and citric acid were also used as fuels in the microw...
full textHigh Speed Preparation of GdCaAl3O7:Eu Nano-Phosphors by Microwave-Assisted Combustion Approach
GdCaAl3O7:Eu red nano-phosphors were synthesized by solution combustion using urea as fuel. Fourier-transform infrared, X-ray diffraction, scanning electron microscope, transmission electron microscope and photoluminescence spectrophotometer were used to characterize the obtained samples. XRD patterns revealed that GdCaAl3O7:Eu pure phase was formed by combustion of metal nitrate solution in th...
full textPreparation and characterization of nano-crystalline LiNi0.5Co0.5VO4 by tartate precursor combustion method
LiNi0.5Co0.5VO4 has been successfully synthesized by tartate precursor combustion method using Li2CO3, Co(NO3)2.6H2O, Ni(NO3)2.6H2O and NH4VO3 as a starting materials in deionized water with the subsequent calcination at 450-600 oC for 12 h. The combustion and decomposition of tartate precursor were studied by TGA and compared with tartaric acid. It found weight loss at 50-450 oC. The product s...
full textMicrowave assisted ignition to achieve combustion synthesis
The use of microwave heating to initiate combustion synthesis has been increasingly investigated in recent years because of its advantages over traditional methods. A simple mathematical model is used to model these experiments. The microwave power absorption term is modelled as the product of an Arrhenius reaction term with a function that decays exponentially with distance. The former represe...
full textMy Resources
Journal title
volume 3 issue 1
pages 19- 25
publication date 2010-08-08
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023