On Numerical Investigation of Semi-empirical Relations Representing Local Nusselt Number at Lower Nozzle-target Spacing’s

Authors

  • A. R. A. Al-Robaian Qassim University, Saudi
  • N. P. Gulhane Veermata Jijabai Technological Institute, Mumbai, India
  • S. A. Khan Mechanical Engineering Department, Faculty of Engg., IIUM, Kuala Lumpur, Malaysia
Abstract:

Examining the cooling rate using impingement of air jet finds a wide application in electronic packaging and micro-scale fluid heat interaction systems, While the prediction of Nusselt profile at low nozzle-target spacing is a big issue. The plot of area average Nusselt number magnitude against the nozzle-target spacing (Z/d) shows a gradual decrement in the profile upto Z/d = 1 and beyond that is steady. The present work aims in anticipating the profile of Nusselt number using semi-empirical relations. These semi-empirical relations are derived using using regression analysis which is carried out between Re, Z/d and local Nusselt number.The data required for regression are obtained through computation. Numerical simulations are accomplished for different impinging and geometric parameters. The semi-empirical power law relations are correlated between Z/d and Re. These are predicted differently for four distinct region of heat sink (stagnant point, near jet region, far jet region, near wall region). The developed correlations are found to bear negative exponent with Z/d and positive exponent with Re. The negative power of r/d and Z/d varies from 0.23 – 0.64 and 0.0025 – 0.38, respectively, While the exponents of Re varies in the positive range of 0.4-0.76.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Investigation of the Local Nusselt Number of the Symmetrical Liquid-Liquid Jets Emitting from a Nozzle

The aim of this paper is to study the local Nusselt number of the symmetrical liquid-liquid jets emitting from a nozzle. Equations obtained from theoretical works are arranged in the form of a computerized model. The validity of this model was tested by the data from an experimental paper [1]. After few adjustments the model predicted the experimental data with a reasonable accuracy. Making...

full text

investigation of the local nusselt number of the symmetrical liquid-liquid jets emitting from a nozzle

the aim of this paper is to study the local nusselt number of the symmetrical liquid-liquid jets emitting from a nozzle. equations obtained from theoretical works are arranged in the form of a computerized model. the validity of this model was tested by the data from an experimental paper [1]. after few adjustments the model predicted the experimental data with a reasonable accuracy. making sur...

full text

On Numerical Investigation of Non-dimensional Constant Representing the Occurrence of Secondary Peaks in the Nusselt Distribution Curves

The Study of heat transfer augmentation in micro scale and electronic packaging systems are some of the paramount areas of the impending universe. In such systems the cooling of the heat sinks are generally achieved through the impingement of air jet. Assuming the air jet to be continues & incompressible fluid, the heat dissipation rate over the target surface seems to either uniform or well ch...

full text

Numerical Investigation in the Effect of Number of Nozzle Hole on Performance and Emission in Dual Fuel Engine

Air pollution is one of the major issues about the diesel engines in todays' world. It is a special concern in those areas that have difficulty meeting health-based outdoor air quality standards. Natural gas has low emission and resource abundance and also conventional compression ignition engine can be easily converted to a dual fuel mode to use natural gas as main fuel and diesel as pilot ...

full text

Numerical Investigation of Supersonic Nozzle Flow Separation

S EPARATION of supersonic flow in a convergent–divergent nozzle is a fundamental fluid phenomenon that affects a large variety of applications, from fuel systems to aircraft engine nozzles. When a supersonic nozzle is operated at pressure ratioswell below its design point, a shock forms inside the nozzle andflowdownstreamof the shock separates from the nozzle walls. Even though flow separation ...

full text

Numerical and Empirical Investigation of Flow Separation Phenomenon around Semi-buried Pipelines due to Steady Currents

In this paper, in order to understand the flow-pipe interaction more clearly, the variations on flow pattern around semi-buried pipelines due to steady current have physically and numerically been investigated. In physical modeling section, the experiments have been carried out in a flume with 10 meter length, 0.3 meter width and 0.5 meter depth using a P.V.C pipe with 6.35 cm in diameter (for ...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 32  issue 1

pages  137- 145

publication date 2019-01-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023