Numerical Investigation of Fluid Mixing in a Micro-Channel Mixer with Two Rotating Stirrers by Using the Incompressible SPH Method

author

  • Rahim Shamsoddini Department of Mechanical Engineering, Sirjan University of technology, Sirjan,, I.R. IRAN
Abstract:

Fluid mixing is a crucial and challenging process for microfluidic systems, which are widely used in biochemical processes. Because of their fast performance, active micromixers that use stirrer blades are considered for biological applications. In the present study, by using a robust and convenient Incompressible Smoothed Particle Hydrodynamics (ISPH) method, miscible mixing within a two-blade micromixer is investigated. The problem discussed herein is represented by an active micromixer comprising two stir-bars that rotate to mix the fluids. Because of its Lagrangian nature, Smoothed Particle Hydrodynamics is an appropriate and convenient method for simulating moving boundary problems and tracking the particles in the mixing process. Previous investigations have been carried out for mixing flow for a low Schmidt number. However, a low Schmidt number is barely applicable for liquid mixing. Hence, in the present study, the Schmidt number is considered to be Sc=1000. The present results show that the two-blade micro-channel mixer considerably improves the mixing rate in comparison with the one-blade micro-channel mixer.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Numerical investigation of free surface flood wave and solitary wave using incompressible SPH method

Simulation of free surface flow and sudden wave profile are recognized as the most challenging problem in computational hydraulics. Several Eulerian/Lagrangian approaches and models can be implemented for simulating such phenomena in which the smoothed particle hydrodynamics method (SPH) is categorized as a proper candidate. The incompressible SPH (ISPH) method hires a precise incompressible hy...

full text

Gas Mixing Simulation in a T-Shape Micro Channel Using The DSMC Method

Gas mixing in a T-shape micro mixer has been simulated using the Direct Simulation Monte Carlo (DSMC) method. It is considered that the adequate mixing occurs when the mass composition of the species, CO or N2, deviates below 1 % from their equilibrium composition. The mixing coefficient is defined as the ratio of the mixing length to the main channel’s height. As the inlet Kn increases, while ...

full text

Fluid mixing in a T-shaped micro-mixer

In relation to the time-scale of chemical kinetics, diffusive transport in micro-devices is faster than in conventional mixers. To exploit the resulting potential for chemical process engineering, size effects evident in the transport processes have to be understood. For this purpose, the scaling behaviour concerning the transport of mass, momentum and heat are considered. Just as much, the mix...

full text

Numerical Investigation of Rotating-Stall in a Stage of an Axial Compressor with Two Different Approaches

An unsteady two-dimensional finite-volume solver was developed based on Van Leer’s flux splitting algorithm in conjunction with “Monotonic Upstream Scheme for Conservation Laws (MUSCL)” limiters and the two-layer Baldwin-Lomax turbulence model was also implemented. To validate the solver, two test cases were prepared and the computed results had good agreements with reference data. The rotating...

full text

gas mixing simulation in a t-shape micro channel using the dsmc method

gas mixing in a t-shape micro mixer has been simulated using the direct simulation monte carlo (dsmc) method. it is considered that the adequate mixing occurs when the mass composition of the species, co or n2, deviates below 1 % from their equilibrium composition. the mixing coefficient is defined as the ratio of the mixing length to the main channel’s height. as the inlet kn increases, while ...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 36  issue 5

pages  173- 183

publication date 2017-10-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023