Normal Heptane Reforming of Promoted Platinum Composite Catalysts: Preparation, Characterization and Catalytic Performance

Authors

  • Amir Sajedi Faculty of Chemistry and Petroleum Sciences, Department of Petroleum Chemistry and Catalysis, University of Shahid Beheshti, Tehran, 1983963113, Iran
  • Mohammad Hasan Peyrovi Faculty of Chemistry and Petroleum Sciences, Department of Petroleum Chemistry and Catalysis, University of Shahid Beheshti, Tehran, 1983963113, Iran
  • Nastaran Parsafard Faculty of Applied Chemistry, Kosar University of Bojnord, North Khorasan, Iran
Abstract:

Pt/Zr(x)-HMS/HZSM-5 catalysts with different ratios of Silicium/Zirconium (denoted as x) were studied for normal heptane reforming at 350-450 °C temperature range. For this purpose, the properties of the catalysts such as X-ray diffraction, X-ray fluorescence, Fourier-transform infrared spectroscopy, Ultraviolet–visible diffuse reflectance spectroscopy, NH3-temperature programmed desorption, H2 chemisorption, N2 adsorption-desorption, and thermal gravimetric analysis were used. The results show that the produced Pt/Zr(x)-HMS/HZSM-5 catalysts have highly efficient performance for n-heptane reforming with a high isomers selectivity up to 69.4% (mono branched isomers = 31.8% and multi branched isomers = 37.6%) and a good selectivity to aromatic compounds (especially toluene = 6.9%), in spite of an appropriate selectivity to light products. It was revealed that the proper structure of these catalysts facilitates the reforming of n-heptane. According to these results, Pt/Zr(35)-HMS/HZSM-5 catalyst showed the favorable properties for this investigated catalytic process.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

CATALYTIC REFORMING OF n-HEPTANE ON PLATINUM-TUNGSTEN SUPPORTED ON GAMMA-ALUMINA

The mono-metallic and bi-metallic catalysts have been prepared by impregnating with solutions containing a compound of H2PtCl6,WO3 and 1ml HCl (0.1 mol). It should be noted that the catalysts’ activity and selectivity have been determined under these conditions : 450-5000C ,and 15-25atm by H2. For converting n-heptane , the molar ratio H2/C7H16 is 5 , and LHSV is 1.5ml/h. It has been proved tha...

full text

Kinetic Study and Modelling of n-Heptane Reforming Process over Pt/Zr-HMS/HZSM-5 Composite Catalysts

Pt/Zr(x)-HMS/HZSM-5 catalysts with various Si/Zr ratios (as x) were used for investigation of the kinetics of n-heptane reforming process under 350 - 450 oC reaction temperature, 35 to 80 ml min-1 flowing rate of hydrogen and 2 to 5 ml h-1 flowing rate of n-heptane. In the present work, two kinetics (power law and Langmuir - Hinshelwood) models were selected and examined to describe the kinetic...

full text

catalytic reforming of n-heptane on platinum-tungsten supported on gamma-alumina

the mono-metallic and bi-metallic catalysts have been prepared by impregnating with solutions containing a compound of h2ptcl6,wo3 and 1ml hcl (0.1 mol). it should be noted that the catalysts’ activity and selectivity have been determined under these conditions : 450-5000c ,and 15-25atm by h2. for converting n-heptane , the molar ratio h2/c7h16 is 5 , and lhsv is 1.5ml/h. it has been proved tha...

full text

Methanol Steam Reforming Promoted by Molten Salt-Modified Platinum on Alumina Catalysts

We herein describe a straight forward procedure to increase the performance of platinum-on-alumina catalysts in methanol steam reforming by applying an alkali hydroxide coating according to the "solid catalyst with ionic liquid layer" (SCILL) approach. We demonstrate by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and temperature-programmed desorption (TPD) studies that ...

full text

preparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis

کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.

Catalytic Performance and Characterization of Promoted K-La/ZSM-5 Nanocatalyst for Biodiesel Production

The promoted K-La nanocatalysts supported on ZSM-5 zeolite were prepared via wetness impregnation method and tested for biodiesel production from soybean oil. The effects of different weight percentage of La, loading of K as a promoter and calcination conditions on structure and activity of catalyst were investigated. Results showed that the supported catalyst containing 7wt.% of La was pro...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 31  issue 1

pages  25- 31

publication date 2020-03-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023