Non Linear Finite Element Analysis of Reinforced and Unreinforeced Pavements

author

Abstract:

In this research a comprehensive finite element program was developed in order to carry out an elasto perfectly plastic analysis of geogrid reinforcement of a model pavement. Qualitative agreement is seen between the numerical results and experiment. The results indicate the influence of geogrid in reduction of vertical deformation of pavements. It is also seen that for strong subgrade, the optimum position of geogrid in base layer is at the level of maximum lateral displacement. This indicates that the main mechanism of geogrid is to restrain soils from lateral displacement through interlocking with the particles. Furthermore, the results show that if deformation of subgrade is concerned (e.g. weak subgrade) the optimum position of geogrid is at the base-subgrade interface due to substantial reduction of horizontal stress transferred subgrade.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Three-dimensional Nonlinear Finite Element Analysis of Continuously Reinforced Concrete Pavements

Continuously reinforced concrete pavement (CRCP) performance depends primarily on early-age cracks that result from changes in temperature and drying shrinkage. This report presents the findings of a study of the early-age behavior of CRCP in response to temperature change using a three-dimensional finite element model. The nonlinear effects of the bond slip between concrete and steel and betwe...

full text

Finite Element Analysis of Reinforced RC Bracket Using CFRP Plates

CFRP composites have unique application qualities such as high resistance and durability to environmental conditions, having relatively low weight and easy to install in strengthening concrete structure elements. The brackets should be strengthen sufficiently if they are not calculated and implemented well. Application of the CFRP is one of the methods for such purposes. The study involves usin...

full text

Non Linear Finite Element Method of Analysis of Reinforced Concrete Deep Beam

ABSTRACT: This paper describes analysis of deep beams subjected to two point loading with three different L/D ratios (1.5, 1.6, 1.71) using Non-linear Finite element method (ANSYS 9.0 software) in order to investigate the stress and strain distribution pattern at mid-section of the beam. In ANSYS 9.0 software, SOLID 65 and LINK 8 element represent concrete and reinforcing steel bars. Non-linear...

full text

Analysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method

Being economical and performing well under cyclic loads, steel sections filled with concrete have been widely used in structural buildings. Extensive studies and experiments have been conducted to investigate the influence of different parameters and loadings on the behavior of these structural components. Based on the data available from previous experiments and studies, this paper discusses t...

full text

Analysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method

Being economical and performing well under cyclic loads, steel sections filled with concrete have been widely used in structural buildings. Extensive studies and experiments have been conducted to investigate the influence of different parameters and loadings on the behavior of these structural components. Based on the data available from previous experiments and studies, this paper discusses t...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 17  issue 3

pages  213- 226

publication date 2004-09-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023