Nanocomposite Ultrafiltration Membranes Incorporated with Zeolite and Carbon Nanotubes for Enhanced Water Separation

Authors

  • Ihsan Wan Azelee Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia
  • Nurul Hazmo Faculty of Chemical Engineering, Universiti Malaysia Pahang
  • Woei Jye Lau Faculty oF Chemical and Energy Engineering, Universiti Teknologi Malaysia
Abstract:

The objective of this work is to develop a new class of nanocomposite ultrafiltration (UF) membranes with excellent solute rejection rate and superior water flux using zeolitic imidazolate framework-8 (ZIF-8) and multi-walled carbon nanotubes (MWCNTs). The effect of ZIF-8 and MWCNTs loadings on the properties of polyvinyldifluoride (PVDF)-based membrane were investigated by introducing respective nanomaterial into the polymer dope solution. Prior to filtration tests, all the membranes were characterized using several important analytical instruments, i.e., SEM-EDX and contact angle analyzer. The addition of the nanoparticles into the membrane matrix has found to increase the membrane pore size and improve its hydrophilicity compared to the pristine membrane. The separation performance of membranes was determined with respect to pure water flux and rejections against bovine serum albumin (BSA) and humic acid (HA).The experimental findings indicated that the nanocomposite membranes in general demonstrated higher permeation flux and solute rejection compared to the pristine membrane and the use of ZIF-8 was reported to be better than that of MWCNTs in preparing nanocomposite UF membranes owing to its better flux and high percentage of solute rejection.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Polysulfone/ Carbon Nanotubes Asymmetric Nanocomposite Membranes: Effect of Nanotubes Surface Modification on Morphology and Water Permeability

Polysulfone/carbon nanotubes (PSF/CNTs) nanocomposite membrane was prepared via phase inversion induced by immersion precipitation technique. In addition, the surface of the CNTs were functionalized by polar carboxylic and amine groups to improve the interaction between the CNTs and the polymer matrix. For this purpose, the neat CNTs were chemically treated using sulfuric acid/ nitric acid (H2S...

full text

Synthesis and characterization of supported Phenolic resin/Carbon nanotubes Carbon membranes for gas separation

In this work, separation performance of supported carbon membranes produced from Novolac Phenolic resin as the main precursor and carbon nanotubes as nanofiller were investigated for separation of CO2 from N2 and CH4. Supports were produced by carbonization of Novolac Phenolic resin-activated carbon mixture, and selective layer was coated by dip coating of prepa...

full text

Synthesis and characterization of supported Phenolic resin/Carbon nanotubes Carbon membranes for gas separation

In this work, separation performance of supported carbon membranes produced from Novolac Phenolic resin as the main precursor and carbon nanotubes as nanofiller were investigated for separation of CO2 from N2 and CH4. Supports were produced by carbonization of Novolac Phenolic resin-activated carbon mixture, and selective layer was coated by dip coating of prepa...

full text

Carbon membranes for efficient water-ethanol separation.

We demonstrate, on the basis of molecular dynamics simulations, the possibility of an efficient water-ethanol separation using nanoporous carbon membranes, namely, carbon nanotube membranes, nanoporous graphene sheets, and multilayer graphene membranes. While these carbon membranes are in general permeable to both pure liquids, they exhibit a counter-intuitive "self-semi-permeability" to water ...

full text

Polysulfone Ultrafiltration Membranes Modified with Carbon-Coated Alumina Supported NiTiO2 Nanoparticles for Water Treatment: Synthesis, Characterization and Application

This paper reports on the synthesis and characterisation of polysulfone (PSf) ultrafltration (UF) membranes modifed with carbon coated alumina Ni-doped titanium dioxide (CCA/Ni-TiO2) nanoparticles. The syntheses of the membranes was carried out using the phase inversion process. The ...

full text

Water–methanol separation with carbon nanotubes and electric fields.

Methanol is used in various applications, such as fuel for transportation vehicles, fuel cells, and in chemical industrial processes. Conventionally, separation of methanol from aqueous solution is by distillation. However, this method consumes a large amount of energy; hence development of a new method is needed. In this work, molecular dynamics simulations are performed to investigate the eff...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 31  issue 8

pages  1446- 1454

publication date 2018-08-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023