Model identification and dynamic analysis of ship propulsion shaft lines
Authors
Abstract:
Dynamic response analysis of mechanical structures is usually performed by adopting numerical/analytical models. Finite element (FE) modeling as a numerical approach plays an important role in dynamic response analysis of complex structures. The calculated dynamic responses from FE analysis are only reliable if accurate FE models are used. There are many elements in real mechanical structures which make constructing accurate FE models difficult. For example, modeling the boundary supports of mechanical structures are usually challenging because of the uncertainties existing in their stiffness values. The stiffness values of boundary supports can be identified by using experimental natural frequencies and hence the FE model can be corrected. In this paper, the FE modeling and updating of propulsion shaft lines in a ship structure is considered by employing experimental modal parameters, i.e. natural frequencies. Natural frequencies of shaft lines are measured by performing experimental vibration testing. The corrected FE models are used and dynamic response analysis of shaft lines is conducted
similar resources
Dynamic analysis of three-cylinder engine with balancing shaft
Three-cylinder linear engines are designed to minimize, reduce fuel consumption and pollution. The disadvantages of this type of engine, heavy vibration inherent in them. this study aims to balance Three-cylinder linear engines with a balancing shaft. First, the dynamic analysis of these types of engines identifies unbalanced sources. The results of the dynamic analysis showed that the inertial...
full textModeling of Ship Propulsion Performance
Full scale measurements of the propulsion power, ship speed, wind speed and direction, sea and air temperature, from four different loading conditions has been used to train a neural network for prediction of propulsion power. The network was able to predict the propulsion power with accuracy between 0.8-2.8%, which is about the same accuracy as for the measurements. The methods developed are i...
full textPower Accounting for Ship Electric Propulsion
Coarse and accurate power accounting methods for ship electric propulsion are observed and compared. For the purpose of analysis, the propulsion system has been separated into two units, namely the ship load and the motor drive. In the load model, variation of such factors like static and dynamic hull resistance and efficiency is explored while the supply characteristics, drive loading, propell...
full texthydrodynamic performance of the modern ship propulsion system
this paper presents numerical calculations for podded propulsion system using vortex theory and potential panel method. the method discretizes the surface boundary of the body (propeller +pod+strut) and obtained the vortex and propeller surface and potential on strut and pod. a model propeller and strut are considered for these calculations and the results of pressure distribution, flow field a...
full textpetrology and geochemistry of khar-bash (western shahrood) and its relation ship to iron mineralization
منطقه مورد مطالعه در 23 کیلومتری جنوب غرب شهرستاشاهرود قرار دارد که در نقشه 100000/1 شاهرود قرار گرفته است.ناحیه مورد مطالعه در تقسیمات ساختاری ایران بخشی از زون البرز شرقی است . در طی سنوزوئیک این زون به شدت تحت تأثیر فازهای کوهزایی آلپی قرار گرفته و فعالیت های آتشفشانی انوسن در قسمت های غربی آن دیده می شود . از نظر ترکیب سنگ شناسی منطقه مورد مطالعه متنوع و بیشتر شامل سنگ های رسوبی مانند : آ...
15 صفحه اولMy Resources
Journal title
volume 1 issue 2
pages 85- 95
publication date 2015-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023