Maximum Power Point Tracking of the Photovoltaic System Based on Adaptive Fuzzy-Neural Method

Authors

Abstract:

The aim of this paper was to present an optimized method in order to use maximum capacity of the photovoltaic panels. In this regard, we presented a method for the maximum power point tracking in the photovoltaic systems by using the neural networks and adaptive controller. In the proposed system, we estimated an error by using neural network. If this error is lower than the allowable systems error, the system works at the maximum power point, and if the error value is greater than the allowable error, the output power can be adjusted by using the adaptive controller. The adaptive part of the proposed system consisted of two fuzzy controllers with two different rule bases. The first controller designed to produce the duty cycle of the boost converter and the second controller designed to adjust online the outputs scaling factor of the first controller. We simulated the proposed system in the MATLAB software and then compared the output power of this system with the output power of the conventional fuzzy and the P&O methods. The comparison results indicated that the proposed system had better performance compared to the two above-mentioned methods.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System

In this paper, we present a modeling and implementation of new control schemes for an isolated photovoltaic (PV) using a fuzzy logic controller (FLC). The PV system is connected to a load through a DC-DC boost converter. The FLC controller provides the appropriate duty cycle (D) to the DC-DC converter for the PV system to generate maximum power. Using FLC controller block in MATLABTM/Simulink e...

full text

Adaptive Fuzzy Proportional Integral Derivative Controller Based Maximum Power Point Tracking For Photovoltaic System

Due to nonlinear P-V characteristics of photovoltaic generator, a maximum power point tracking(MPPT) algorithm is needed to optimize the performance of photovoltaic (PV) system.In this paper, an adaptive fuzzy proportional integral derivative (AFPID) control based maximum power point tracking strategy for photovoltaic system is proposed. The proposed adaptive fuzzy PID method integrates two lev...

full text

Adaptive fuzzy gain scheduling PID controller for maximum power point tracking of photovoltaic system

This paper proposes a methodology of designing a Maximum Power Point Tracking (MPPT) controller for photovoltaic systems (PV) using a Fuzzy Gain Scheduling of Proportional-Integral-Derivative (PID) type controller (FGS-PID) with adaptation of scaling factors (SF) for the input signals of FGS. The proposed adaptive FGS-PID method is based on a two-level control system architecture, which combine...

full text

PIC based photovoltaic maximum power point tracking control system

Maximum power point tracking (MPPT) is used in photovoltaic (PV) systems to maximize the PV array output power, irrespective of the temperature and irradiation conditions and the load electrical characteristics. This paper presents a practical implementation of perturbation and observation (P&O) and incremental conductance (IncCon) algorithms based on PIC18F452 microcontroller for tracking of t...

full text

Maximum Power Point Tracking Control for Photovoltaic System Using Adaptive Neuro- Fuzzy ''ANFIS''

Due to scarcity of fossil fuel and increasing demand of power supply, we are forced to utilize the renewable energy resources. Considering easy availability and vast potential, world has turned to solar photovoltaic energy to meet out its ever increasing energy demand. The mathematical modeling and simulation of the photovoltaic system is implemented in the MATLAB/Simulink environment and the s...

full text

Maximum power point tracking using adaptive fuzzy logic control for grid-connected photovoltaic system

This paper proposes a method of maximum power point tracking using adaptive fuzzy logic control for grid-connected photovoltaic systems. The system is composed of a boost converter and a single-phase inverter connected to a utility grid. The maximum power point tracking control is based on adaptive fuzzy logic to control a switch of a boost converter. Adaptive fuzzy logic controllers provide at...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 6  issue 4

pages  26- 31

publication date 2017-01

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023