Mathematical modeling of a fixed bed chromatographic reactor for Fischer Tropsch synthesis

Authors: not saved
Abstract:

In this research, Fischer Tropsch synthesis (FTS) has been modeled in the fixed bed chromatographic reactor for the first time by applying a rather complex dispersed plug flow model for fluid phase and linear driving force (LDF) model for adsorbent. Model equations are dynamic, multi-component, non-linear and heterogeneous including reaction and adsorption simultaneously Complex kinetics for FTS and water-gas shift (WGS) reaction and the multicomponent Langmuir adsorption isotherm is used in the model. A set of partial differential and ordinary differential equations with algebraic equations have been converted into a set of ordinary differential equations by using the orthogonal collocation technique. Then this set of equations has been solved by multi-step methods of Numerical Differentiation Formulae (NDF) or Backward Dif-ferentiation Formulae (BDF) Known as the Gear’s method. Consequently, results for dynamic model and effects of modeling parameters have been analyzed. Through this fixed bed chromatographic reactor model, one may develop a suitable configuration of simulated moving bed chromatographic reactors.      

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Determination of the Product Selectivity Model from the Fischer Tropsch Synthesis in a Fixed Bed Reactor

The Fischer-Tropsch synthesis is a catalytic process that can produce a fuel similar to fossil fuels by using primary sources such as agricultural waste and carbon sources that can convert into synthesis gas by superheated steam. All fuel derivatives can be supplied through the Fischer-Tropsch reaction. The synthesis produces a variety of hydrocarbons via parallel and sequential reactions. Howe...

full text

Modeling and Optimization of Fixed-Bed Fischer-Tropsch Synthesis Using Genetic Algorithm

  In this paper, modeling and optimization of Fischer-Tropsch Synthesis is considered in a fixed-bed catalytic reactor using an industrial Fe-Cu-K catalyst. A one dimensional pseudo-homogenous plug flow model without axial dispersion is developed for converting syngas to heavy hydrocarbons. The effects of temperature, pressure, H2 to CO ratio in feed stream, and CO molar flow on the mass flow r...

full text

Modeling of Fischer–tropsch Synthesis Packed Bed Reactor for Producing Liquid Fuels from Natural Gas

A tubular pilot scale fixed-bed reactor for the Fischer–Tropsch Synthesis (FTS) was simulated to numerically demonstrate the conversion of synthesis gas (CO+H2) to higher hydrocarbons over an iron based catalyst. The reactor was a 3.1 cm diameter and 2.75 m length steel tube. The feed temperature were between 563583 K. Saturated water was employed to control the peak temperature within the cata...

full text

Improved numerical simulation of the low temperature Fischer-Tropsch synthesis in a trickle bed reactor

Abstract Gas to liquid (GTL) process involves heterogeneous catalytic chemical reactions that convert synthesis gas to hydrocarbons and water vapor. A three phase reactor, called Low temperature Fischer-Tropsch (LTFT) is commonly applied for GTL process. In this reactor the gaseous phase includes the synthesis gas, light hydrocarbons and water vapor, the liquid phase is a mixture of the h...

full text

modeling and optimization of fixed-bed fischer-tropsch synthesis using genetic algorithm

in this paper, modeling and optimization of fischer-tropsch synthesis is considered in a fixed-bed catalytic reactor using an industrial fe-cu-k catalyst. a one dimensional pseudo-homogenous plug flow model without axial dispersion is developed for converting syngas to heavy hydrocarbons. the effects of temperature, pressure, h2 to co ratio in feed stream, and co molar flow on the mass flow rat...

full text

α-Olefins Synthesis from Fischer-Tropsch Reaction in a Trickle Bed Reactor

The influence of solvent on the selectivity of α-olefin in the product hydrocarbon as a function of carbon number over a 20 wt.% Co on SiO2 catalyst under the typical reaction conditions of 513 K, 4.5 MPa and H2/CO = 2 has been investigated. Hydrocarbons with different carbon numbers and molecular structures, including n-hexane, n-octane, n-decane, n-dodecane, n-hexadecane, iso-octane and decah...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 3  issue 3

pages  51- 64

publication date 2006-07-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023