Investigating the Performance of Cracked Asphalt Pavement Using Finite Elements Analysis
Authors
Abstract:
Occurrence of top down and bottom up fatigue cracking in asphaltic pavements is common. Conventional pavement analysis methods ignore the existence of cracks in asphaltic layers. However, it seems that the responses of cracked pavement would not be the same as a pavement without crack. This paper describes effects of crack type, position and length, and vehicles tire inflation pressure and axle load on the performance of cracked asphalt pavement. Tensile strain at the bottom of asphaltic layer, the vertical strain on subgrade, maximum deflection on the surface, rut depth and the stress intensity factors of cracked pavement, with top down and bottom up crack have been computed using 3D Finite Elements method in ABAQUS. Moving load of standard single axle with different loads and tire pressures have been used in the analysis. Standard 8.2 ton single axle load at different tire pressures of 552(80), 690(100), 828(120) and 1035(150) kPa(psi) and single axle at different loads of 5, 8.2 and 15 ton, all at the same tire pressure of 690 kPa, have been used. Results show that the pavement responses increase with increasing tire pressure and axle load with higher values and rate of increase with increasing tire pressure and axle load for the cracked pavement compared with the pavement without crack. For the pavement structure investigated in this study, it was found that, in general, top down crack results in higher responses than bottom up crack.
similar resources
buckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Evaluating the Performance of Dowel in PCC Pavement of Roads using ABAQUS Finite Element Software
In Portland Cement Concrete (PCC) pavement of the roads, dowels bar transfers vehicle loading to the unloaded slab. Load Transfer Efficiency (LTE) is used to evaluate dowel bars in PCC pavement. This parameter is defined as the vertical displacement ratio of the loaded slab versus the unloaded slab. In this study, the impact of effective factors (friction coefficient between dowel and concrete ...
full textAsphalt Pavement Performance Model of Airport Using Microwave Remote Sensing Satellite
The purpose of this study is to build the binary logit model of an airport pavement that could monitor the pavement condition in near real time using microwave remote sensing satellite, then the relationship between the international roughness index (IRI) of an airport and backscattering values from PALSAR images of the ALOS satellite was determined. Total 390 data were used in analysis. This m...
full textEvaluating the Performance of Hot Mix Asphalt with Reclaimed Asphalt Pavement and Heavy Vacuum Slops as Rejuvenator
Due to the high price of crude oil, and consequently asphalt binder, the application of Reclaimed Asphalt Pavement (RAP) in pavement technology is widely considered. The present paper is the result of a laboratory research which was carried out to investigate the effects of adding a rejuvenating agent to Hot Mix Asphalt (HMA) with RAP. To this end, test samples comprised of Aged Asphalt Binder ...
full textMy Resources
Journal title
volume 53 issue 1
pages 33- 51
publication date 2020-06-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023