Improved performance of subballast stabilized using geocell for high speed train
Authors
Abstract:
Rapid urbanization and growing industrial demand in many developing countries has led to frequent congestion of the transport infrastructure. Therefore, the expansion of high-speed rail (HSR) networks is crucial to meet this growing demand. Nevertheless, applying high cyclic stress causes significant lateral spreading and in turn excessive settlements of the track substructure. This problem becomes more crucial when the subballast layer is constructed using locally available poor quality granular material in order to keep the construction costs to minimum. The use of planar form of geosynthetics (geogrid, geotextile, geocomposite) to improve the performance of rail track is well established. Large-scale laboratory and full scale field studies conducted in the past at the Center for Geomechanics and Railway Engineering (CGRE) of the University of Wollongong, NSW, Australia, have shown that geogrids and geocomposites of appropriate technical specifications can effectively reduce track settlement. Recent studies have shown that cellular confinement, known as geocell mattress, can offer more confinement than planar geogrid for the infill material. By employing geocell as reinforcement in subballast layer, tensile strength mobilized as an additional confinement and arrests lateral spreading of infill material and help to maintain track geometry
similar resources
A study of the train performance simulation for Korean next Generation high-speed train
The next generation high-speed train system, HEMU-400X, has been developed in Korea since 2007. HEMU-400X means High-speed Electric Multiple Unit – 300 experimental. Objectives of HEMU-400X project is development of next generation high-speed electric multiple unit with maximum operation speed 370km/h and maximum test speed 400km/h, energy efficiently and environment friendly. At present, the d...
full textCrew Rostering for the High Speed Train
At the time of writing we entered the final stage of implementing the crew rostering system Harmony CDR to facilitate the planning of catering crews on board of the Thalys, the High Speed Train connecting Paris, Cologne, Brussels, Amsterdam, and Geneva. Harmony CDR optimally supports the creation of crew rosters in two ways. Firstly, Harmony CDR contains a powerful algorithm to automatically ge...
full textA System Model for Technological Capabilities Assessment in High-speed Train Industries
The purpose of this study is to provide a model with a dynamic system method to investigate the factors affecting the technological capabilities enhancement in the high-tech industries of high-speed train of the rail transportation system. For this purpose, after reviewing the literature and conducting several meetings with experts in the rail transportation industry, a conceptual and qualitati...
full textPerformance Improvement of LeastSquares Adaptive Filter for High-Speed Train Communication Systems
The downlink communication channel from high-altitude platform (HAP) to high-speed train (HST) in the Ka-band is a slowly time-varying Rician distributed flat fading channel with 10-25 dB Rician K factor. In this respect, the received signal is mainly affected by the Doppler shift of the line-of-sight (LOS) link. In order to increase receiver performance, we propose to firstly compensate the Do...
full textCFD Simulation of High-speed Trains: Train-induced Wind Conditions on Trackside Installations
Speed is the created air flow as well as slipstream effects as the trains move. These effects can have some level of impact on fuel and energy efficiency of the train, but their other important outcome is the emergence of turbulent flows at higher speeds which can cause aerodynamic drag forces followed by noise and vibration. Thus, slipstream effects have significant importanc...
full textPhase Frequency Detector Using Transmission Gates for High Speed Applications
In this paper a new phase-frequency detector is proposed using transmission gates which can detect phase difference less than 500ps. In other word, the proposed Phase-frequency Detector (PFD) can work in frequencies higher than 1.7 GHz, whereas a conventional PFD operates at frequencies less than 1.1 GHz. This new architecture is designed in TSMC 0.13um CMOS Technology. Also, the proposed PFD a...
full textMy Resources
Journal title
volume 3 issue 2
pages 1- 8
publication date 2016-12
By following a journal you will be notified via email when a new issue of this journal is published.
No Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023