Hydraulic anti-lock, anti-skid braking system using fuzzy controller
Authors
Abstract:
To maintain the stability trajectory of vehicles under critical driving conditions, anti lock-anti skid controllers, consisting of four anti-lock sub-controllers for each wheel and two anti-skid sub-controllers for left and right pair wheels have been separately designed. Wheel and body systems have been simulated with seven degrees of freedom to evaluate the proper functioning of controllers. Anti-lock controllers control brake torque through persistent monitoring of wheels velocity and acceleration and prevent them from locking up by cutting and releasing the brake fluid flow into wheel brake cylinder. On the other hand, anti-skid controllers have been designed in order to maintain the vehicle along a stable trajectory, calculated from the stable spin theory, and to monitor the vehicle’s trajectory during braking. This controller maintains the vehicle along the desirable trajectory by monitoring vehicle yaw angle and comparing it with the reference yaw angle, and also by adjusting the level of brake fluid input into each wheel’s caliper, and subsequently by adjusting brake torque. At the end of the current research, the use of yaw rate control input in place of yaw angle control input in anti-skid controllers has been suggested through a comparative analysis.
similar resources
optimal type-2 fuzzy controller for anti-lock braking systems
anti-lock braking system (abs) is a nonlinear and time varying system including uncertainty, so it cannot be controlled by classic methods. intelligent methods such as fuzzy controller are used in this area extensively; however traditional fuzzy controller using simple type-1 fuzzy sets may not be robust enough to overcome uncertainties. for this reason an interval type-2 fuzzy controller is de...
full textBicycle Anti-Lock Braking System Prototype Development
The passive and also the active safety systems of the vehicles evolved in the last decades. Beside the safety system of cars and trucks the smaller vehicles like the motorbikes, scooters, e-bikes and bicycle’s systems evolved as well. The aim of the project was to create and develop a prototype bicycle that uses a hydraulic type antilock braking system. The paper presents shortly the dynamics o...
full textAn Approach to Fuzzy Modeling of Anti-lock Braking Systems
This paper proposes an approach to fuzzy modeling of Anti-lock Braking Systems (ABSs). The local state-space models are derived by the linearization of the nonlinear ABS process model at ten operating points. The Takagi-Sugeno (T-S) fuzzy models are obtained by the modal equivalence principle, where the local state-space models are the rule consequents. The optimization problems are defined in ...
full textDesign of an anti-lock regenerative braking system for a series hybrid electric vehicle
In this paper, an adaptive rule based controller for an anti-lock regenerative braking system (ARBS) of a series hybrid electric bus (SHEB) has been proposed. The proposed controller integrates the regenerative braking and wheel anti-lock functions by controlling the electric motor of the hybrid vehicle, without using any conventional mechanical anti-lock braking system. The performance of the ...
full textDesign of a hydraulic anti-lock braking system (ABS) for a motorcycle
This work presents a hydraulic anti-lock braking system (ABS) for a motorcycle. The ABS has a hydraulic modulator and an intelligent controller. The hydraulic modulator is analyzed, and then equipped on a scooter for road tests. The intelligent controller controls the hydraulic modulator by estimated vehicle velocity to calculate the slip ratio of the wheels in real time. The performance of the...
full textMy Resources
Journal title
volume 6 issue 1
pages 21- 37
publication date 2016-09-11
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023