HSE Cultural Assessment by SWOT-AHP Case study : Shirvan combined cycle power plant.
author
Abstract:
This research was aimed at evaluating and promoting the HSE culture in the Shirvan combined cycle power plant. 125 people were selected as the statistical population and the hypotheses were tested. Based on the results of the IFE 663/2 matrix and the EFE 875/2 matrix, there is evidence of overcoming strengths over weaknesses and opportunities for threats. The aggressive strategy was declared as an appropriate strategy and, toward the results of the QSPM matrix, the awareness-raising scenario for staffing (by providing brochures, slides, banners and training classes) with a score of 33.33 as the best solution Introduced
similar resources
Modeling of a Geothermal Cycle Condenser in a Combined Diesel Power Cycle: Case Study of 42 MW Diesel Power Plant in Moghan and Ardabil
This paper presents the results of a research into the feasibility of recovering waste heat and determining design parameters of a recovery boiler for a set of medium-speed diesel generators with a capacity of 7 MW (the nominal capacity of all units is 42 MW, which would be a study on a unit). And is used to generate electricity. The main purpose of this study is to design a thermal waste recov...
full textAssessment of a Real Combined Cycle Power Plant with Supplementary Firing Based on Advanced Exergy/Exergoeconomic Methods
This research performs the advanced exergy and exergoeconomic analyses of a combined cycle power plant (CCPP) located in Zavareh, Iran. The objective of this research is to evaluate the irreversibilities, their related cost rates of each part of the CCPP that can be avoided and the inefficiencies of each part that caused by other components. The advanced exergy and exergoeconomic analyses indic...
full textRisk Assessment of Health Safety and Environmental of Samangan Combined Cycle Power Plant using FMEA&SAW Integrated Model
A power plant can be considered a workplace with a high level of risk.For this reason in order to ensure sustainable Performance in Power Plants risk management is essential. In this study the AHP method for Classification of risks And the FMEA method for risk Rating and SAW method was used to rank the risks. Finally, the ranking was done by FMEA&SAW method.According to the result s of the AHP...
full textA System Dynamics Model to Evaluate Emissions in A Combined Cycle Power Plant
Environment and the need to protect and care for it, is one of the main concerns of industrial development in todaychr('39')s society; and air pollution is one of the most noticeable and tangible causes of it. The increasingly growth of the industry has led to the production and diffusion of gaseous pollutants into the air and among them; thermal power plants are one of the most important sourc...
full textLife cycle assessment of steel production from iron scrap: a case study at a steel plant
Background and Objective: The steel industry is the world's largest consumer of energy. A large amount of iron waste is produced annually, which its use in the steel industry can be economic. The purpose of this study was to investigate the environmental impacts of the steelmaking from iron scrap as a raw material using a life cycle assessment (LCA) method. Materials and Methods: Simapro softw...
full textA System Dynamics Model to Evaluate Emissions in A Combined Cycle Power Plant
Environment and the need to protect and care for it, is one of the main concerns of industrial development in todaychr('39')s society; and air pollution is one of the most noticeable and tangible causes of it. The increasingly growth of the industry has led to the production and diffusion of gaseous pollutants into the air and among them; thermal power plants are one of the most important sourc...
full textMy Resources
Journal title
volume 7 issue 24
pages 0- 0
publication date 2020-05
By following a journal you will be notified via email when a new issue of this journal is published.
No Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023