High-Speed Penternary Inverter Gate Using GNRFET

Authors

  • Mahdieh Nayeri Department of Computer Engineering, Kerman Branch, Islamic Azad University, Kerman, Iran
  • Maryam Nayeri Department of Electrical Engineering, Yazd Branch, Islamic Azad University, Yazd, Iran
  • Peiman Keshavarzian Department of Computer Engineering, Kerman Branch, Islamic Azad University, Kerman, Iran
Abstract:

This paper introduces a new design of penternary inverter gate based on graphene nanoribbon field effect transistor (GNRFET). The penternary logic is one of Multiple-valued logic (MVL) circuits which are the best substitute for binary logic because of its low power-delay product (PDP) resulting from reduced complexity of interconnects and chip area. GNRFET is preferred over Si-MOSFET for circuit design due to its fantastic thermal, mechanical and electrical properties. For this circuit design, the voltage divisions obtained with resistors. All the circuits are simulated and compared by HSPICE, 15nm GNR Technology with the supply voltage of 0.8V. Simulation results demonstrate that the PDP is about 1e-18. Therefore, MVL design based on GNRFET leads to minimum PDP than other devices such as CNTFET and MOSFET. Furthermore, the transient wave is absolutely accurate. The variation of the figure of merits (FOM) such as power consumption, propagation delay, and PDP is investigated as a function of a number of the ribbon in GNRFET structure.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

A Novel Design of Quaternary Inverter ‎Gate Based on GNRFET

   This paper presents a novel design of quaternary logic gates using graphene nanoribbon field effect transistors (GNRFETs). GNRFETs are the alternative devices for digital circuit design due to their superior carrier-transport properties and potential for large-scale processing. In addition, Multiple-valued logic (MVL) is a promising alternative to the conventional binary logic design. Sa...

full text

A Novel Design of Penternary Inverter Gate Based on Carbon Nano Tube

This paper investigates a novel design of penternary logic gates usingcarbon nanotube field effect transistors (CNTFETs). CNTFET is a suitable candidate forreplacing MOSFET with some useful properties, such as the capability of having thedesired threshold voltage by regulating the diameter of the nanotubes. Multiple-valuedlogic (MVL) such as ternary, quaternary, and penternary is a promising al...

full text

High-Speed Ternary Half adder based on GNRFET

Superior electronic properties of graphene make it a substitute candidate for beyond-CMOSnanoelectronics in electronic devices such as the field-effect transistors (FETs), tunnel barriers, andquantum dots. The armchair-edge graphene nanoribbons (AGNRs), which have semiconductor behavior,are used to design the digital circuits. This paper presents a new design of ternary half a...

full text

Channel thickness dependency of high-k gate dielectric based double-gate CMOS inverter

This work investigates the channel thickness dependency of high-k gate dielectric-based complementary metal-oxide-semiconductor (CMOS) inverter circuit built using a conventional double-gate metal gate oxide semiconductor field-effect transistor (DG-MOSFET). It is espied that the use of high-k dielectric as a gate oxide in n/p DG-MOSFET based CMOS inverter results in a high noise margin as well...

full text

High Speed & Power Efficient Inverter using 90nm MTCMOS Technique

A high speed and low power CMOS inverter is designed & simulated in this paper. The critical path consists of PMOS and NMOS. The designed inverter cell offers high speed and low power consumption than the CMOS inverter. A Multi Threshold Complementary Metal Oxide Semiconductor (MTCMOS) technique is used to reduce the leakage current as well as leakage power to achieve better results. MTCMOS is ...

full text

Floating-Gate UVMOS inverter

The supply and threshold voltage scaling has been proposed for low-voltage/low-power design [1, 2, 3]. The programmable floating-gate circuits [3, 4] can be used to implement low-voltage/low-power digital circuits. The threshold voltages are shifted using reversed supply voltages and UV-light. The supply voltage may be reduced and the current level is determined by the threshold shift. Before t...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 10  issue 2

pages  1- 9

publication date 2019-05-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023