High Efficient Nanocomposite for Removal of Heavy Metals (Hg2+ and Pb2+) from Aqueous Solution
Authors
Abstract:
In current work, CdS/black carbon nanocomposites were successfully synthesized with the aid of chestnut and cadmium nitrate as the starting reagents. Besides, the effects of preparation parameters such as reaction time, and precursor concentration on the morphology of products and removal of heavy metals (Hg+2, Pb+2) were studied by scanning electron microscopy images and batch adsorption mode. CdS/black carbon nanocomposite introduced as new and high efficient system for removal of heavy metal ions. The as-synthesized products were characterized by powder X-ray diffraction, scanning electron microscopy, and spectra energy dispersive analysis of X-ray.
similar resources
high efficient nanocomposite for removal of heavy metals (hg2+ and pb2+) from aqueous solution
in current work, cds/black carbon nanocomposites were successfully synthesized with the aid of chestnut and cadmium nitrate as the starting reagents. besides, the effects of preparation parameters such as reaction time, and precursor concentration on the morphology of products and removal of heavy metals (hg+2, pb+2) were studied by scanning electron microscopy images and batch adsorption mode....
full textRemoval of Heavy Metals from Aqueous Solution by Mordenite Nanocrystals
This study examined the ability of the synthetic mordenite nanocrystal to remove Tl(III) and As(III) from an aqueous solution. The determination of the concentration changes of H+ and OH- quantities in the acidic (pH 3) and alkali (pH 9) treated mordenite nanocrystals were done by the potentiometric titration curves. The maximum uptake capacities (Qmax) of these metal ions using the mordenite i...
full textPreparation of magnetic chitosan/Fe-Zr nanoparticles for the removal of heavy metals from aqueous solution
Copper and hexavalent chromium are heavy metals that are harmful to human health. Natural adsorbent chitosan, due to its considerable properties such as the presence of functional groups of –NH2 and -OH, non-toxicity, low cost, and biocompatibility, has gained much attention in pollutant removal. Therefore, in the present study, adsorption of chromium (VI) and copper (II) ions was conducted in ...
full textRemoval of heavy metals from aqueous solution by sawdust adsorption.
The adsorption of lead, cadmium and nicel from aqueous solution by sawdust of walnut was investigated. The effect of contact time, initial metal ion concentration and temperature on metal ions removal has been studied. The equilibrium time was found to be of the order of 60 min. Kinetics fit pseudo first-order, second-order and intraparticle diffusion models, hence adsorption rate constants wer...
full textremoval of heavy metals from aqueous solution by mordenite nanocrystals
this study examined the ability of the synthetic mordenite nanocrystal to remove tl(iii) and as(iii) from an aqueous solution. the determination of the concentration changes of h+ and oh- quantities in the acidic (ph 3) and alkali (ph 9) treated mordenite nanocrystals were done by the potentiometric titration curves. the maximum uptake capacities (qmax) of these metal ions using the mordenite i...
full textRemoval of heavy metals from aqueous solution by biochars derived from anaerobically digested biomass.
This study examined the ability of two biochars converted from anaerobically digested biomass to sorb heavy metals using a range of laboratory sorption and characterization experiments. Initial evaluation of DAWC (digested dairy waste biochar) and DWSBC (digested whole sugar beet biochar) showed that both biochars were effective in removing a mixture of four heavy metals (Pb(2 +), Cu(2+), Ni(2+...
full textMy Resources
Journal title
volume 6 issue 1
pages 23- 27
publication date 2016-01-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023