Heterogeneous Functionalization of Polyethersulfone: A New Approach for pH-Responsive Microfiltration Membranes with Enhanced Antifouling Properties

Authors

  • Jane Ngila Department of Applied Chemistry, Faculty of Science, University of Johannesburg, P. O. Box 17011, Doornfontein 2028, Johannesburg, South Africa
  • Keneiloe Sikhwivhilu DST/Mintek Nanotechnology Innovation Centre, Advanced Materials Division, Mintek, 200 Malibongwe Drive, Randburg, 2125, Johannesburg, South Africa
  • Lwazi Ndlwana Department of Applied Chemistry, Faculty of Science, University of Johannesburg, P. O. Box 17011, Doornfontein 2028, Johannesburg, South Africa
  • Richard Moutloali Department of Applied Chemistry, University of Johannesburg, Johannesburg, South Africa
Abstract:

In this work, 2,2’-azo-bis-butyronitrile (AIBN) was exploited as an initiator for the successful bulk heterogeneous functionalization of polyethersulfone (PES) using polymethacrylic acid (PMAA), for the first time. To this end, pH-responsive and exceptionally low fouling membranes of extremely low grafting degrees with low adhesion and high rejection of protein were fabricated. An added advantage of this method is the accomplishment of graft polymerization of methacrylic acid (MAA) in water in the absence of toxic solvents, scavengers or catalysts. Changes to surface functional groups of the PES powder were determined using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and thereafter validated with X-ray photoelectron spectroscopy (XPS). The phase inversion technique was used to fabricate microfiltration membranes (MFs), which were found to possess up to 40% improved hydrophilicity relative to pristine PES membranes. Protein adsorption was reduced by more than 80% while its rejection and the pure water permeate flux recovery ratio (FR) were 97%, and 86%, respectively. Furthermore, the membrane maintained 90% FR over 10 cycles. The newly fabricated membranes possess enhanced response to pH stimulus.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Membranes with Surface-Enhanced Antifouling Properties for Water Purification

Membrane technology has emerged as an attractive approach for water purification, while mitigation of fouling is key to lower membrane operating costs. This article reviews various materials with antifouling properties that can be coated or grafted onto the membrane surface to improve the antifouling properties of the membranes and thus, retain high water permeance. These materials can be separ...

full text

Modified polyethersulfone membranes for micellar enhanced ultrafiltration of chromium

Separation performances of micellar enhanced ultrafiltration process in Cr(III) and Cr(VI) removal has been evaluated. The neat as well as sulfonated and aminated derivatives of polyethersulfone were tested as the material for membrane preparation while hexadecylpyridine chloride and sodium dodecyl sulfate served as surfactant. It was shown that modified membranes can better reject both forms o...

full text

a new approach to credibility premium for zero-inflated poisson models for panel data

هدف اصلی از این تحقیق به دست آوردن و مقایسه حق بیمه باورمندی در مدل های شمارشی گزارش نشده برای داده های طولی می باشد. در این تحقیق حق بیمه های پبش گویی بر اساس توابع ضرر مربع خطا و نمایی محاسبه شده و با هم مقایسه می شود. تمایل به گرفتن پاداش و جایزه یکی از دلایل مهم برای گزارش ندادن تصادفات می باشد و افراد برای استفاده از تخفیف اغلب از گزارش تصادفات با هزینه پائین خودداری می کنند، در این تحقیق ...

15 صفحه اول

Carbon Nanotube/Alumina/Polyethersulfone Hybrid Hollow Fiber Membranes with Enhanced Mechanical and Anti-Fouling Properties

Carbon nanotubes (CNTs) were incorporated into alumina/polyethersulfone hollow fibre membranes to enhance the mechanical property and the efficiency of water treatment. Results show that the incorporation of CNTs can greatly limit the formation of large surface pores, decrease the void size in support layers and improve the porosity and pore connectivity of alumina/polyethersulfone membranes. A...

full text

Polymeric composite membranes for temperature and pH-responsive delivery of doxorubicin hydrochloride

Objective(s): Nowadays hydrogels are one of the upcoming classes of polymer-based controlled-release drug delivery systems. Temperature and pH-responsive delivery systems have drawn much attention because some diseases reveal themselves by a change in temperature and/or pH. The objective of this work is to prepare and characterize composite membrane using responsive nanoparticles into a polymer...

full text

Enzymatic Modification of Polyethersulfone Membranes

Enzymatic modification of polyethersulfone (PES) membranes has been found not only feasible, but also an environmentally attractive way to vary surface properties systematically. In this paper, we summarize the effect of modification layers on protein adsorption and bacterial adhesion on PES membranes and surfaces. The enzyme laccase was used to covalently bind (poly)phenolic acids to the membr...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 6  issue 2

pages  178- 187

publication date 2020-04-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023