Gold catalytic Growth of Germanium Nanowires by chemical vapour deposition method

Authors

  • M. Farangi Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P. O. Box. 87317–51167, Iran
  • M. H. Pakzamir Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P. O. Box. 87317–51167, Iran
  • M. Zahedifar Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P. O. Box. 87317–51167, Iran
Abstract:

Germanium nanowires (GeNWs) were synthesized using chemical vapor deposition (CVD) based on vapor–liquid–solid (VLS) mechanism with Au nanoparticles as catalyst and germanium tetrachloride (GeCl4) as a precursor of germanium. Au catalysts were deposited on silicon wafer as a thin film, firstly by sputtering technique and secondly by submerging the silicon substrates in Au colloidal solution, which resulted in Au nanoparticles with different sizes. GeNWs were synthesized at 400 °C, which is a low temperature for electrical device fabrication. Effect of different parameters such as Au nanoparticles size, carrier gas (Ar) flow and mixture of H2 with the carrier gas on GeNWs diameter and shape was studied by SEM images. The chemical composition of the nanostructure was also examined by energy dispersive X-ray spectroscopy (EDS).

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

gold catalytic growth of germanium nanowires by chemical vapour deposition method

germanium nanowires (genws) were synthesized using chemical vapor deposition (cvd) based on vapor–liquid–solid (vls) mechanism with au nanoparticles as catalyst and germanium tetrachloride (gecl4) as a precursor of germanium. au catalysts were deposited on silicon wafer as a thin film, firstly by sputtering technique and secondly by submerging the silicon substrates in au colloidal solution, wh...

full text

Catalytic hydride vapour phase epitaxy growth of GaN nanowires.

Catalytic growth of GaN nanowires by hydride vapour phase epitaxy is demonstrated. Nickel-gold was used as a catalyst. Nanowire growth was limited to areas patterned with catalyst. Characterization of the nanowires with transmission electron microscopy, x-ray diffraction, and low temperature photoluminescence shows that the nanowires are stoichiometric 2H-GaN single crystals growing in the [000...

full text

Gold catalyzed growth of silicon nanowires by plasma enhanced chemical vapor deposition

Silicon nanowires were selectively grown at temperatures below 400 °C by plasma enhanced chemical vapor deposition using silane as the Si source and gold as the catalyst. A detailed growth study is presented using electron microscopy, focused ion beam preparation, and Raman spectroscopy. A radio-frequency plasma significantly increased the growth rate. The Si nanowires show an uncontaminated, c...

full text

Gas-phase dynamics in graphene growth by chemical vapour deposition.

Chemical vapour deposition on a Cu substrate is becoming a very important approach to obtain high quality graphene samples. Previous studies of graphene growth on Cu mainly focus on surface processes. However, recent experiments suggest that gas-phase dynamics also plays an important role in graphene growth. In this article, gas-phase processes are systematically studied using computational flu...

full text

Investigation of single-walled carbon nanotube growth parameters using alcohol catalytic chemical vapour deposition.

A detailed parametric study of single-walled carbon nanotubes (SWNTs) synthesized in powder form and on substrates using the alcohol catalytic chemical vapour deposition (ACCVD) method is reported. As-grown SWNTs were analysed using transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM), Raman spectroscopy and UV-vis-NIR spectroscopy to obtain structural an...

full text

Fine-tuning of catalytic tin nanoparticles by the reverse micelle method for direct deposition of silicon nanowires by a plasma-enhanced chemical vapour technique.

The reverse micelle method was used for the reduction of a tin (Sn) salt solution to produce metallic Sn nanoparticles ranging from 85 nm to 140 nm in diameter. The reverse micellar system used in this process was hexane-butanol-cetyl trimethylammonium bromide (CTAB). The diameters of the Sn nanoparticles were proportional to the concentration of the aqueous Sn salt solution. Thus, the size of ...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 3  issue 1

pages  103- 108

publication date 2013-03-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023