Fragility Curves Derivation for a Pile-Supported Wharf
Authors
Abstract:
This study aims to develop seismic fragility curves for a typical pile-supported wharf. Fragility curve is one of the popular tools in seismic performance evaluation of a structure. The software FLAC2D was used to simulate the seismic performance of the wharf structure. Using eight time history records, occurred in past, as seismic loading, incremental dynamic analysis (IDA) was applied for seismic demand estimation. Based on the resulted seismic response matrix the analytical fragility curves were developed. As a prevailing tool, adopted fragility curves are useful for seismic risk assessment. They can also be used to optimize wharf-retrofit methods.
similar resources
fragility curves derivation for a pile-supported wharf
this study aims to develop seismic fragility curves for a typical pile-supported wharf. fragility curve is one of the popular tools in seismic performance evaluation of a structure. the software flac2d was used to simulate the seismic performance of the wharf structure. using eight time history records, occurred in past, as seismic loading, incremental dynamic analysis (ida) was applied for sei...
full textFragility Curves for Reinforced Concrete Frames with Lap-Spliced Columns
Placing column lap-splice in the locations of possible nonlinear deformation may adversely affect the structures response to strong ground motions. Localization of damage in splice zone may change the structural response and prevent the load redistribution and development of a uniform pattern of nonlinear excursions among the various members. Validated by existing laboratory experiments, this s...
full textFRAGILITY CURVES FOR STRUCTURES EQUIPPED WITH OPTIMAL SATMDs
In this paper, a procedure has been presented to develop fragility curves of structures equipped with optimal variable damping or stiffness semi-active tuned mass dampers (SATMDs). To determine proper variable damping or stiffness of semi-active devices in each time step, instantaneous optimal control algorithm with clipped control concept has been used. Optimal SATMDs have been designed based ...
full textA methodology for Determining the Seismic Vulnerability of Old Concrete Highway Bridges by Using Fragility Curves
Past earthquakes have demonstrated that old RC bridges may be seismically vulnerable. Bridge responses during the last decades illustrated the necessity of the seismic assessment of bridges especially those which were designed with old codes. In this research an existing concrete bridge representative of the most common bridges in the highway system in Iran are studied. Push over and nonlinear ...
full textDssi for Pile Supported Asymmetrical Building: a Review
The past earthquake study conducted on the foundation system (soil and foundation) reveals that the interaction of soil and foundation plays a major role in the response of superstructure. In this regard a literature survey has been carried out on frame structures supported on pile foundation which is in contact with more soil mass as compared to the other type of foundation system. In this res...
full textDSSI for pile supported asymmetrical buildings : a review
Several attempts have been carried out to understand the foundation failures during earthquake type of transient loading and it has been found that the interaction effect between soil and foundation is one of the important aspects need to be considered in the analysis and design. In this regard a literature survey has been carried out on frame structures supported on pile foundation which is in...
full textMy Resources
Journal title
volume 1 issue None
pages 1- 10
publication date 2013-06
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023