Forced Hydraulic Jump by One and Two Continuous Sills in a Horizontal Stilling Basin.
author
Abstract:
Forced hydraulic jump in a horizontal stilling basin with one and two continuous sills at the downstream end of an ogee standard weir was investigated. Experiments were completed on sills of five different heights which were fixed at two different distances from the toe of the weir. The main characteristics of the jump such as the sequent depth ratio, relative roller 
length, and relative energy loss were analysed. Based on the momentum equation and using an experimental coefficient, a method was adopted to predict the sequent depth ratio. Using the results of the experiments, an analytical expression was developed for the prediction of the relative roller length. These methods agree well with the writers, and other investigators, experiments. The results of experiments on one and two prolonged sills showed that by increasing the height of the sill or shortering the distance of the sill from the toe of the weir, the reduction of the sequent depth and also the roller length obtains, but the energy loss increases

similar resources
مطالعه آزمایشگاهی اثر دیوارههای روزنهدار در حوضچه آرامش بر عمق ثانویه و طول غلتاب پرش هیدرولیکی
The purpose of this study was to evaluate two perforated sills in the stilling basin and their impact on characteristics of the hydraulic jump, such as the length of the roller of hydraulic jump, decrease in the secondary depth of the hydraulic jump, and the required tailwater depth. Also, the optimal distance of two perforated sills from the beginning of the stilling basin with a fixed height ...
full textExperimental Investigation of the Characteristics of Hydraulic Jump in a Diverging Stilling Basin with an Adverse Slope Using Baffle Blocks
Stilling basins have been used as an energy dissipater downstream of hydraulic structures. Dimensions of the stilling basins depends on hydraulic jump characteristics. In this research diverging hydraulic jump with an adverse slope using baffle blocks and an end sill have been studied experimentally and effect of diverging angle of the walls, adverse bed slope and baffle blocks on the hydraulic...
full textارزیابی تأثیرآبپایه انتهایی با اشکال متفاوت بر ویژگیهای پرش هیدرولیکی
One of the most important problems in the design of a stilling basin is determination of the exact location of the hydraulic jump or stabilization of the hydraulic jump. In the present study, the effects of different forms of end sills on hydraulic jump characteristics were studied. The experiments were carried out for three different forms of end sills, rectangular, square and stepped, with th...
full textCharacteristics of S-jump on Roughened Bed Stilling Basin
Formation of hydraulic jump is necessary for dissipation of the excess kinetic energy downstream of spillways and gates. Hydraulic jump stilling basins of sudden expansion are one of the energy dissipater structures which are used where the available tail water depth is less than the required sequent depths. In the present study to further reduce the hydraulic jump sequent depths ratio, a rough...
full textan experimental study of convergent hydraulic jump in stilling basins
abstract many studies have been conducted on the characteristics of hydraulic jump over gradually expanding cross sections, but comparatively few have been carried out on basins with convergent wall. in the present research, the hydraulic jump characteristic of the stilling basin with convergent wall has been investigated. the main objective of this research is evaluation of conjugate depths ra...
full textMy Resources
Journal title
volume 24 issue 1
pages 97- 119
publication date 2005-07
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023