Experimental Investigation on Asphaltene Deposition in Porous Media During Miscible Gas Injection

Authors

  • Behruz Mirzayi Department of Chemical Engineering, Faculty of Engineering, Tarbiat Modares University, P.O. Box 14115-4838 Tehran, I.R. IRAN
  • Mahdi Fasih Research Institute of Petroleum Industry (R.I.P.I.), P.O. Box 18745-4163 Tehran, I.R. IRAN
  • Mohsen Vafaie Sefti Department of Chemical Engineering, Faculty of Engineering, Tarbiat Modares University, P.O. Box 14115-4838 Tehran, I.R. IRAN
  • Sayed Ali Mousavi Dehghani Research Institute of Petroleum Industry (R.I.P.I.), P.O. Box 18745-4163 Tehran, I.R. IRAN
Abstract:

In this work the likelihood of asphaltene deposition problems during dynamic displacement of oil by natural gas in unconsolidated porous media is experimentally inspected. The two different rock materials, limestone and sandstone, are used as a representative of porous media. Dynamic flow experiments indicate that the increase of natural gas injection increases asphaltene deposition in the unconsolidated matrix. The results of the study show that increase in asphaltene deposition leads to pore plugging, porosity reduction and absolute permeability damage. Irreducible water measurements showed that natural gas-induced asphaltenes change the rock wettability to oil-wet.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

experimental investigation on asphaltene deposition in porous media during miscible gas injection

in this work the likelihood of asphaltene deposition problems during dynamic displacement of oil by natural gas in unconsolidated porous media is experimentally inspected. the two different rock materials, limestone and sandstone, are used as a representative of porous media. dynamic flow experiments indicate that the increase of natural gas injection increases asphaltene deposition in the unco...

full text

An Investigation on the Effects of Charged Polyacrylamide Injection on Asphaltene Deposition in Porous Media

This study has been investigated, the effects of three different polar polyacrylamides (anionic, cationic, and nonionic) on asphaltene deposition in porous media. All experiments were carried out in various dead oil flow rates (0.2, 0.1 and 0.02 cc/min) and different polymer concentrations (500, 2500, 4000 ppm). The results indicated that asphaltene precipitation was affected by the presence of...

full text

an investigation on the effects of charged polyacrylamide injection on asphaltene deposition in porous media

this study has been investigated, the effects of three different polar polyacrylamides (anionic, cationic, and nonionic) on asphaltene deposition in porous media. all experiments were carried out in various dead oil flow rates (0.2, 0.1 and 0.02 cc/min) and different polymer concentrations (500, 2500, 4000 ppm). the results indicated that asphaltene precipitation was affected by the presence of...

full text

Miscible porous media displacements driven by non-vertical injection wells

High-resolution simulations are employed to identify and analyse the mechanisms dominating miscible porous media displacements generated by inclined injection wells. Compared to vertical injection wells, significant differences are observed that strongly influence breakthrough times and recovery rates. Constant density and viscosity displacements, for which the velocity field is potential in na...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 26  issue 4

pages  39- 48

publication date 2007-12-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023