Experimental Evaluation of Performance Criteria for Reinforced Concrete Beams under Cyclic Loading
author
Abstract:
To assess the performance criteria of the reinforced-concrete, five-storey residential buildings common in Iran, an experimental study in the structural laboratory of the University of Tehran has been conducted. The test program includes cyclic and monotonic load tests of six beams that represent three-to-five storey buildings with rigid frame structures. Using definitions given in FEMA-356 and ATC-40, stages of immediate occupancy, life safety, and collapse prevention have been identified on the drift- force curves of all specimens. Based on the test results, values of the plastic rotation, ductility, strain in concrete cover and in longitudinal bar, crack width, damage index, and length of plastic region at different levels have been determined. It was found that the recommended values of plastic rotation and ductility for reinforced concrete beams by FEMA-356 are conservative. The length of plastic hinge region in the stage of immediate occupancy is about half the plastic hinge length in the stage of life safety and it increases by 20% from life safety to collapse prevention
similar resources
Behaviour of Reinforced Fibrous Concrete Beams under Reversed Cyclic Loading
When earthquakes occur, energy released by the earthquake gets induced into the structure as ground motion and this energy has to be dissipated for safety reasons. To release seismic energy, the structure should damage in such a way that on one hand, collapse of structure should not occur and on the other hand, after the earthquake, damage should be economically feasible to repair. To avoid the...
full textSubstructure Model for Concrete Behavior Simulation under Cyclic Multiaxial Loading
This paper proposes a framework for the constitutive model based on the semi-micromechanical aspects of plasticity, including damage progress for simulating behavior of concrete under multiaxial loading. This model is aimed to be used in plastic and fracture analysis of both regular and reinforced concrete structures, for the framework of sample plane crack approach. This model uses multilamina...
full textReliability evaluation of reinforced concrete beams
The purpose of this paper is to evaluate the time-invariant reliability of reinforced concrete beams designed under the provisions of the ACI Building Code. A wide range of practical design situations is considered. The beams are subjected to bending, shear, and torsion. The interaction between shear and torsion is considered via an elliptical failure surface defined in the shear-torsion stress...
full textEffects of Loading Rate on Reinforced Concrete Beams
The effects of loading rate on the reinforced concrete beams are experimentally studied in the present paper. Firstly, the effects of strain rate on the different grades of concrete are investigated using the electro-hydraulic servo-controlled testing system at the strain rate that might be experienced during earthquakes. Based on the test results, the dynamic increasing factors (DIF) of concre...
full textmonotonic and cyclic loading of new frp reinforced concrete cantilever beams
frps (fiber reinforced polymer) possess many favorable characteristics suitable and applicable for construction industry when compared with steel reinforcement. there are new ideas to use frps as longitudinal or transverse reinforcement for new concrete elements particularly for bridge decks or beams. although high tensile strength of frp is main characteristic for applications at both areas, i...
full textMy Resources
Journal title
volume 25 issue 1
pages 63- 77
publication date 2006-07
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023