Experimental and numerical study of heat flux distribution in laser forming of bi-layer sheets

Authors

  • Mohamad Hoseinpour Gollo Manufacturing Engineering Department, Shahid Rajaee Teacher Training University, Tehran, Iran
  • Mohammad Riahi Faculty of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
  • Seiied Nader Ameli Kalkhoran Faculty of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
Abstract:

Laser forming is a modern process which is mainly used for forming metals. Different Lasers are used in this regard that includes Nd: YAG and CO2. In this study, forming bi-layer sheets of Aluminum/Ceramic by Laser was investigated. Furthermore, effect of Uniform and Gaussian heat flux distribution in different power, velocity, and beam diameters on bending angle was studied. FEM simulation indicated that, in the same conditions of analysis, Uniform heat flux distribution caused higher bending angle than Gaussian heat flux distribution. Moreover, the results showed that there was an optimum point at different speeds and laser beam diameters, at which the bending angle was maximum. In order to evaluating the numerical results, a set of experiments was conducted, which showed good agreement.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

experimental and numerical study of heat flux distribution in laser forming of bi-layer sheets

laser forming is a modern process which is mainly used for forming metals. different lasers are used in this regard that includes nd: yag and co2. in this study, forming bi-layer sheets of aluminum/ceramic by laser was investigated. furthermore, effect of uniform and gaussian heat flux distribution in different power, velocity, and beam diameters on bending angle was studied. fem simulation ind...

full text

Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets

This study aimed to evaluate Laser-cutting process of Mild Steel St37 sheets with two different thicknesses. In order to evaluate the quality of cutting edge and the depth of the area affected by the heat, several tests were conducted to determine the effect of parameters such as Laser power, Laser beam movement speed and pressure of axillary gas on the quality of cutting edge and the depth of ...

full text

Numerical and Experimental Study of Effect of Scan Velocity in Laser Forming by Temperature Gradient Mechanism

In this paper the process of laser forming has been investigated using an analytical and an experimental method for three levels scans velocity. A coupled analysis has been performed in ANSYS®. Also in order to prove the predictive methods, experiments on thin sheet metals have been done when a laser of a fair power was used. Before done, experiments were designed with full factorial chosen as ...

full text

An Experimental and Numerical Study of Forming Limit Diagram of Low Carbon Steel Sheets

The forming limit diagram (FLD) is probably the most common representation of sheet metal formability and can be defined as the locus of the principal planar strains where failure is most likely to occur. Low carbon steel sheets have many applications in industries, especially in automotive parts, therefore it is necessary to study the formability of these steel sheets. In this paper, FLDs, wer...

full text

a study of relationship between knowledge sharing and organizational agility among personnel in esfahan power electric distribution company

پژوهش حاضر به بررسی رابطه بین تسهیم دانش و چابکی سازمانی در شرکت توزیع برق استان اصفهان پرداخته است . ابزار سنجش در این پژوهش پرسشنامه می باشد . به منظور سنجش متغیر تسهیم دانش از پرسشنامه وانگ و وانگ و جهت سنجش چابکی سازمانی از پرسشنامه چاربونیر استفاده شده است . هدف پژوهش حاضر تحلیل رابطه میان تسهیم دانش و چابکی سازمانی از دید کارکنان شرکت توزیع برق استان اصفهان می باشد . جامعه آماری این پژوه...

15 صفحه اول

a contrastive study of rhetorical functions of citation in iranian and international elt scopus journals

writing an academic article requires the researchers to provide support for their works by learning how to cite the works of others. various studies regarding the analysis of citation in m.a theses have been done, while little work has been done on comparison of citations among elt scopus journal articles, and so the dearth of research in this area demands for further investigation into citatio...

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 4  issue 1

pages  67- 79

publication date 2014-09-11

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023