Evaluation of different materials used for post construction and stress distribution in the radicular dentin using finite element method
Authors
Abstract:
Evaluation of different materials used for post construction and stress distribution in the radicular dentin using finite element method Dr. S. Nokar *- Dr. AS. Mostafavi ** *Assistant Professor of Prosthodontics Dept., Faculty of Dentistry, Tehran University / Medical Sciences. **Resident of Prosthodontics Dept., Faculty of Dentistry, Tehran University / Medical Sciences. Abstract Background and Aim: This study was designed to evaluate the stress distributions of different post materials in radicular dentine for providing a useful clinical guideline. Materials and Methods: In this experimental study, 5 three - dimensional models of maxillary central incisors were simulated by using ANSYS software and Finite Element Method. The models included: 1) Stainless Steel post 2) Titanium post 3) Carbon fiber post 4) Glass fiber post, and 5) Quartz fiber post. A composite core and PFM crown was constructed for all samples. Each model contained gingival, cortical and spongy bone, PDL and gutta-percha as well. All specimens were subjected to a compressive load at 45-degree angle to its long axis with a constant intensity of 100N. Results: In all models there were two stress concentration sites: 1- a point between middle third and cervical third of the root and 2 - the cervical edge of the root. The amount of stresses between middle and the cervical third of fiber reinforced posts were nearly 1 MPa greater than those of the metallic ones. Conclusion: Compared to other materials, the metallic posts caused less stress in the radicular dentin and therefore are recommended for clinical use. Among fiber reinforced posts, Quartz fiber post showed the lowest stress peak. Key words: Post materials - Finite element analysis - Stress distribution Corresponding Author: Prosthodontics Dept., Faculty of Dentistry, Tehran University of Medical Sciences. e.mail: [email protected]
similar resources
buckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Evaluation of stress distribution in endodontically treated teeth, restored with post and crown by finite element analysis
Evaluation of stress distribution in endodontically treated teeth, restored with post and crown by finite element analysis Dr. H. Kermanshah * - Dr. M. Mirzaee* - Dr. L. Ranjbar Omrani** *- Assistant Professor of Operative Dentistry Dept. - Faculty of Dentistry–Tehran University of Medical Sciences. **- Operative Dentistry Specialist. Background and Aim: Proper restoration of root canal treated...
full textEvaluation of Gasoline Engine Piston with Various Coating Materials Using Finite Element Method
The purpose of this paper is to examine the piston stress distribution using several thicknesses of the coating materials to achieve higher gasoline engine performance. First of all, finite element structure analysis is used to uncoated petrol piston made of aluminum alloy. Then, steel and cast iron piston materials are conducted and compared with the aluminum piston. After that, investigation ...
full textCorrecting the stress-strain curve in hot compression test using finite element analysis and Taguchi method
In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...
full textMy Resources
Journal title
volume 19 issue 3
pages 24- 31
publication date 2007-12
By following a journal you will be notified via email when a new issue of this journal is published.
No Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023