Estimation of Lift Force on a Rough Vertical Pile of Platform to Random Sea Waves
Authors
Abstract:
Similar to random sea waves, forces on the offshore structures due to waves are random. These forces can be mainly divided into two components, namely, inline forces and transverse or lift forces. The random nature of lift forces is more complicated than that of inline forces and both should be combined for design purposes. In the present paper, two different approaches have been used to determine time series of lift forces. Along these lines, the determination of lift coefficients is discussed which have then been used to obtain transverse forces and compared with experimental data. The experimental data used in this study were collected at Delft Hydraulics Laboratory on a full-scale rough vertical cylinder.
similar resources
Estimation of Hydrodynamic Force on Rough Circular Cylinders in Random Waves and Currents (RESEARCH NOTE)
Most of the Codes of Practice (API, BSI, DnV, NPD) uses Morison's equation to estimate hydrodynamic loads on fixed and moving offshore structures. The significant difference in the prediction of the loads mainly arises from the assumption of the values of hydrodynamic coefficients. In this paper by analysing a full scale set of data in large KC's numbers collected from Delta Wave Flume in the N...
full textEstimation of Hydrodynamic Forces on the Cylinderical Smooth Piles to Random Waves and Currents
Most Codes such as API and BSI recommend Morison’s equation to estimate hydrodynamic forces on offshore structures. Significant differences exist among these Codes due to using different methods of analysis and estimation of force coefficients. In this paper, data from full scale tests have been used to evaluate random waves and uniform current actions on the smooth piles.
 Four time an...
full textEstimation of Hydrodynamic Forces on the Cylinderical Smooth Piles to Random Waves and Currents
Most Codes such as API and BSI recommend Morison’s equation to estimate hydrodynamic forces on offshore structures. Significant differences exist among these Codes due to using different methods of analysis and estimation of force coefficients. In this paper, data from full scale tests have been used to evaluate random waves and uniform current actions on the smooth piles. Four time and ...
full textImprovement of the heave motion of a semi-submersible platform with damping sheets subjected to sea waves
In this study, the damping sheets were attached to a semi-submersible platform to mitigate the heave motions. We first examined a typical GVA4000 semi-sub under a monochromatic linear wave train in deep water. an analytical method based on diffraction theory was used to determine the heave motion response. The results revealed that the analytical results show good agreement with available exper...
full textthe effect of taftan pozzolan on the compressive strength of concrete in the environmental conditions of oman sea (chabahar port)
cement is an essential ingredient in the concrete buildings. for production of cement considerable amount of fossil fuel and electrical energy is consumed. on the other hand for generating one tone of portland cement, nearly one ton of carbon dioxide is released. it shows that 7 percent of the total released carbon dioxide in the world relates to the cement industry. considering ecological issu...
My Resources
Journal title
volume 23 issue 1
pages 83- 94
publication date 2004-07
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023