Electrodeposition of Nano Hydroxyapatite Coating on Biodegradable Mg-Zn Scaffold (TECHNICAL NOTE)
author
Abstract:
Magnesium has been recently recognized as a biodegradation metal for bone substitute application. In the present work, porous magnesium-zinc scaffolds were prepared by powder metallurgical process and nano hydroxyapatite (HAP) coating on the Mg-3Zn (wt.%) scaffold was prepared by pulse electrodeposition and alkali treatment processes to improve the corrosion resistance of scaffold. The results indicated the as-deposited coating consists of HAP, DCPD and OCP with needle-like and plate-like structures and the post-treated coating was composed of needle-like particles of nano HAP that developed almost perpendicularly to the substrate. Electrochemical tests showed that the corrosion potential of scaffold significantly increased from –1.475 to –1.365 V and the corrosion current density reduced 1.5-fold in comparison to the scaffold modified by nano hydroxyapatite coating.
similar resources
ELECTRODEPOSITION OF NANO SIZE HYDROXYAPATITE COATING ON TI ALLOY
A film of osteoconductive and biocompatible material on biomedical metallic implants can create bioactivity of the implant and shorten healing time. Hydroxyapatite, that is the most important mineral part of human bone, was coated on Ti6Al4V using cathodic electrode position process. Pulse electrode position technique was used and the effects of different parameters such as potential, duty cycl...
full textBone-repair properties of biodegradable hydroxyapatite nano-rod superstructures.
Nano-hydroxyapatite (nano-HAp) materials show an analogous chemical composition to the biogenic mineral components of calcified tissues and depending on their topography they may mimic the specific arrangement of the crystals in bone. In this work, we have evaluated the potential of four synthesized nano-HAp superstructures for the in vitro conditions of bone-repair. Experiments are underway to...
full textSurface Activation of NiTi Alloy by Using Electrochemical Process for Biomimetic Deposition of Hydroxyapatite Coating (TECHNICAL NOTE)
Electrochemical depositions of calcium phosphate (Ca-P) film on NiTi alloy in concentrated simulated body flood (SBF×5) were carried out by cathodic polarization. The Ca-P layer was successfully deposited on Ni-Ti alloy substrate under 10mA/cm2 current density for 2 hours at room temperature. Then, in order to investigate the bioactivity of the pre-calcified samples, they were immersed in SBF f...
full textHydroxyapatite coating on - - zlrconlausing glass coating technique
The aim of this study was to deyelop a noyel hydroxyapatite (HA) coating method on zirconia using glass coating technique. A borosi)icate glass, the mixture of the glass ttnd HA (3e, 50, 70, and 90 mass%), and the 100% HA were coated on two kinds of zirconia discs and fired at 900-950'C. After the final coating, the surface of the sample was etched for 3 min in an acid-mixture of 3% HF and 5%HN...
full textHydroxyapatite coating on porous zirconia
Since hydroxyapatite has excellent biocompatibility and bone bonding ability, porous hydroxyapatite ceramics have been intensively studied. However, porous hydroxyapatite bodies are mechanically weak and brittle, which makes shaping and implantation difficult. One way to solve this problem is to introduce a strong porous network onto which hydroxyapatite coating is applied. In this study, porou...
full textMy Resources
Journal title
volume 27 issue 6
pages 939- 944
publication date 2014-06-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023