Efficient removal of cobalt(II) ion from aqueous solution using amide-functionalized metal-organic framework
Authors
Abstract:
In this study, an amide-functionalized metal-organic framework, namely TMU-24 was selected to adsorb Co(II) from wastewater with an adsorption capacity of 500 mg. g-1 in less than 20 minutes in neutral pH (pH=7). The effect of diverse parameters such as adsorbent dosage, competitive ions, and contact time on the adsorption process was investigated to find the optimal amounts of them. Also, the modeling calculations demonstrated that this compound obeys Pseudo-Second-order and Langmuir models with correlation coefficients of R² = 0.9996 and R² = 0.9761, respectively. So, the adsorption mechanism could be monolayer chemical interaction according to these models. Moreover, PXRD patterns of the framework before the adsorption procedure and after that revealed that the MOF could keep its structure, suggesting the stability of the framework. So, we can claim that our proposal adsorbent is a promising candidate for cobalt(II) removal from pollutant water.
similar resources
Batch experimental studies of Hg(II) ion removal from aqueous solution using seven synthetic polymers
In this work application of seven synthetic polymers as adsorbents for the removal of Hg(II) from aqueous solution was studied. The equilibrium studies are systematically carried out in a batch process, covering various process parameters that include agitation time, adsorbent dosage, and pH of the aqueous solution. Variations of Hg(II) concentration in solution have been studied through measur...
full textOptimization of solvothermally synthesized ZIF-67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution
In this study, ZIF-67 was synthesized through solvothermal method to remove Cr(VI) ions from aqueous solution. To improve the structural properties of ZIF-67 and its adsorption capacity, optimization of the synthesis conditions was carried out based on maximum Cr(VI) uptake. From experiments, the optimum condition was revealed as solvent: metal ion molar ratio of 4.6:1, ligand: metal ion molar ...
full textEfficient Removal of Co2+ from Aqueous Solution by 3-Aminopropyltriethoxysilane Functionalized Montmorillonite with Enhanced Adsorption Capacity
To achieve a satisfactory removal efficiency of heavy metal ions from wastewater, silane-functionalized montmorillonite with abundant ligand-binding sites (-NH2) was synthesized as an efficient adsorbent. Ca-montmorillonite (Ca-Mt) was functionalized with 3-aminopropyl triethoxysilane (APTES) to obtain the APTES-Mt products (APTES1.0CEC-Mt, APTES2.0CEC-Mt, APTES3.0CEC-Mt, APTES4.0CEC-Mt) with e...
full textRemoval of Cationic Dyes from Aqueous Solution using Organomodified Nanoclay
In this work, organomodified nanoclay has been used as the adsorbent for the removal ofbasic blue 41, cationic dye from an aqueous solution. The performance of the organomodified nanoclay was tested in a batch system under varying pH (2–12), adsorbent dosage (0.1–2 g L-1), initial dye concentration (10–60 mgL-1), and contact time (5- 100 min). The best conditions were achieved at pH of 7,...
full textSynthesis of magnetic metal-organic framework (MOF) for efficient removal of organic dyes from water
A novel, simple and efficient strategy for fabricating a magnetic metal-organic framework (MOF) as sorbent to remove organic compounds from simulated water samples is presented and tested for removal of methylene blue (MB) as an example. The novel adsorbents combine advantages of MOFs and magnetic nanoparticles and possess large capacity, low cost, rapid removal and easy separation of the solid...
full textMy Resources
Journal title
volume 8 issue 3
pages 190- 200
publication date 2020-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023