Effects of Glass Fiber Reinforced Polymer on Geotechnical Properties of Clayey Soil
Authors
Abstract:
Soil reinforcement can be considered as the combination of two parts. One part is soil for compressive stress capacity and another part is some material such as geosynthetics such as steel belts and fibers for tensile stress capacity. Soil improvement is one of the useful methods to increase the strength parameters of the soil. The main goal of this study is to evaluate the effects of GFRP on the bearing capacity, shear strength, and permeability of clayey soil. For this purpose, the length of GFRP is selected 10 mm and amount of GFRP are 0.2, 0.4, 0.6, 0.8 and 1% that mixed randomly with clay. Mixture specimens prepared using the optimum water content. Bearing capacity of specimens measured by unconfined compressive test and direct shear test. Also, Permeability parameter assessed based on the falling head permeability test. Results of this study showed that with mixing GFRP up to 0.8% increases the clay bearing capacity and flexibility. Although with continuing to add GFRP the bearing capacity decrease, the clay permeability using GFRP is increased.
similar resources
Effects of Glass-Fiber Reinforced Polymer and Waste Polypropylene Plastic Particles on Geotechnical Properties of Clayey Soils for Using Subgrade in the Pavement
The fine-grained soil including the problematic ones can cause many difficulties in project accomplishment. Settlement and swelling are among the problems of the fine-grained soils. The present study compared the effects of the polypropylene waste plastic (PWP) and glass fiber reinforced polymer (GFRP) on geotechnical properties of the clayey soils for the subgrade design. To this end, the PWP ...
full textEvaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
full textShear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
full textAnalysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE)
Milling of fiber reinforced polymer composites is of great importance for integrated composites with other mating parts. Improper selection of cutting process parameters, excessive cutting forces and other machining conditions would result in rejection of components. Therefore, machining conditions are optimized to reduce the machining forces and damages. This work reports practical experiments...
full textResearch on the Mechanical Properties of a Glass Fiber Reinforced Polymer-Steel Combined Truss Structure
An assembled plane truss structure used for vehicle loading is designed and manufactured. In the truss, the glass fiber reinforced polymer (GFRP) tube and the steel joint are connected by a new technology featuring a pretightened tooth connection. The detailed description for the rod and node design is introduced in this paper, and a typical truss panel is fabricated. Under natural conditions, ...
full textExperimental Investigation on Mechanical Properties of Coal Ash Reinforced Glass Fiber Polymer Matrix Composites
Glass fiber reinforced polymer composites are one of the most widely used composite materials. The addition of Coal ash to polymer matrix dramatically increases the overall mechanical strength of the composite material as compared to the polymer composite. In view of this, a method is proposed for mixing coal ash powder (size 52-75 μm) into resin and Ash reinforced polymer composites are fabric...
full textMy Resources
Journal title
volume 7 issue 2
pages 73- 83
publication date 2017-09-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023