Effect of type and distribution of shear studs on the behavior of composite steel-concrete shear walls

Authors

  • Masood Farzam Assistant Professor, Faculty of Civil Engineering, Tabriz University, Tabriz, Iran
Abstract:

In this research in-plane shear Behavior of composite steel-concrete shear walls was investigated considering the Effects of steel plates thickness, spaces between shear studs, shape and type of shear studs and existing of minimum reinforcement in wall section. Several finite element models were analyzed and Numerical results of two models were taken under verification with existent experimental results.numerical results coincide experimental result with an acceptable accuracy.numerical models analysis results show that increasing steel plate thickness, yield shear strength and ultimate shear strength become higher. Increasing shear stud spaces causes shear resistance decrease to some extent. Models have iron angles in compare with models have shear studs of the same stud spaces, have higher yield shear resistance and ultimate shear resistance. Angles connection way to steel plates are effective in increasing or decreasing ultimate shear strength.Wall with minimum reinforcement in comparison with the wall with no rebar has greater ductility and shear strength.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Structural Behavior of Axially Loaded Composite Concrete-steel Plate Shear Walls

composite concrete-steel plate shear walls are the most critical resisting structural members that resist lateral and axial loads. This type of wall consisting of two steel faceplates presenting the outer skin, infill concrete and shear connectors which are used to provide the composite action of the steel faceplates with infill concrete in order to increase the strength and to reduce the local...

full text

Comparison of plasticity and stiffness of steel shear walls with composite steel plate shear wall

The steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. Composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasin...

full text

the effect of taftan pozzolan on the compressive strength of concrete in the environmental conditions of oman sea (chabahar port)

cement is an essential ingredient in the concrete buildings. for production of cement considerable amount of fossil fuel and electrical energy is consumed. on the other hand for generating one tone of portland cement, nearly one ton of carbon dioxide is released. it shows that 7 percent of the total released carbon dioxide in the world relates to the cement industry. considering ecological issu...

Behavior of Steel–Concrete Composite Beams with Corroded Shear Studs Under Negative Bending Moment

The behavior of corroded steel–concrete composite beams under hogging moment was studied by experimental investigation and theoretical analysis. A total of eight specimens, six of which had corroded shear studs, were tested. The corrosion rate of studs ranged from 0 to approximately 50%. The constant-current accelerated corrosion method was adopted to accelerate the corrosion process. The loadi...

full text

non-linear study of various slit shear walls in steel structures

seismic retrofit strategies have been developed in the past few decades following the introduction of new seismic provisions and the availability of advanced materials and methods. it can be observed that new approaches to deal with more lateral forces are more innovative and more energy absorbent. in line with this, there is a growing trend toward the use of steel shear walls as a system with ...

15 صفحه اول

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 7  issue 3

pages  131- 140

publication date 2019-08-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023