Effect of the Concrete Strength on the Concrete-Steel Bond in Concrete Filled Steel Tubes

the effect of taftan pozzolan on the compressive strength of concrete in the environmental conditions of oman sea (chabahar port)

cement is an essential ingredient in the concrete buildings. for production of cement considerable amount of fossil fuel and electrical energy is consumed. on the other hand for generating one tone of portland cement, nearly one ton of carbon dioxide is released. it shows that 7 percent of the total released carbon dioxide in the world relates to the cement industry. considering ecological issu...

Numerical Analysis of Concrete-Filled Circular Steel Tubes

Bond of High Strength Concrete with High Strength Reinforcing Steel

This paper presents a study about the bond of high strength concrete with high strength steel. Fourteen pull out tests were carried out to determine the bond. The concrete strength was about 70 MPa and the steel was a 500 MPa grade. Bar diameters used were 12, 16, 20, 25, 28, 32 and 36 mm. In order to investigate the effect of cover, each test was done twice, once in a 240 mm diameter concrete ...

Numerical Simulation of Ultra- Strength Concrete-filled Steel Columns

Article history: Received: 11. 09. 2013. Received in revised form: 01. 10. 2013. Accepted: 15. 10. 2013. Researches into the constitutive relation of the super high strength and high performance concrete and the stress strain relationship of the ultrastrength concrete-filled steel columns are rare. Therefore, this paper based on continuous mechanics presents the relationship of mathematical des...

Flexural Performance of High-strength Prestressed Concrete-encased Concrete-filled Steel Tube Sections

The sections composed of concrete and steel, which include concrete-encased concrete-filled tubes, generally have defects due to the low tensile strength of concrete. Therefore, an appropriate method was used for the combination of concrete-filled tubes (CFT) and prestressing strands which is encased in concrete. The conventional design guidelines are commonly developed for materials with norma...

Evaluation of concrete-steel bond strength in wet mix sprayed concrete

The high performance obtained in wet mix sprayed concrete has extended the field of applications of this technique. In some of these applications, such as in diaphragm walls or bridge rehabilitation, the structure may be subjected to bending moments, so conventional reinforcement is regularly used. In this context it is important to assure adequate bond between steel rebar and the sprayed concr...