Effect of Platform Surge Motion on the Performance of 5MW NREL Offshore Floating Wind Turbine
Authors
Abstract:
In this study, an unsteady aerodynamic simulation is performed to realize the influences of platform surge motion on the aerodynamic performance of a high capacity offshore floating wind turbine. A dynamic model with pitch angle control system is utilized to propose a more realistic model of wind turbine and also achieve the rated condition of the rotor. The transient effect of platform surge motion on power coefficient, thrust coefficient and blade pitch angle also is investigated. The 5 MW NREL wind turbine is selected for the simulations. The unsteady aerodynamic model contains unsteady blade element momentum method, dynamic stall and dynamic inflow models. The in-home aerodynamic code and the control system model are implemented in MATLAB/SIMULINK software. It is revealed that reduction in mean power coefficient at tip speed ratios less that 7 is expected by amount of 12-15 % at surge amplitude of 2m and frequency of 0.1 Hz. For high tip speed ratios, the trend is reverse with respect to fixed-platform case. The mean thrust coefficient is also reduced for many tip speed ratios with maximum loss of 32 %. The mean blade control pitch angle is increased due to the surge motion. Since the influence of changing amplitude and frequency of disturbances depends on the tip speed ratio, therefore the special bound of this parameter is being proposed.
similar resources
Performance based assessment of offshore wind turbine platform using the constrained new wave method
The purpose of this study is to provide a more accurate and practical method than static and spectral methods to assess the offshore wind turbines that are loaded with both wave and wind time history, the structure is evaluated by increasing the load intensity in successive steps to the stage of failure and the performance of the platform in different wave patterns are investigated. In this stu...
full textModeling and Simulation of Offshore Wind Power Platform for 5 MW Baseline NREL Turbine
This paper presents the modeling and simulation of offshore wind power platform for oil and gas companies. Wind energy has become the fastest growing renewable energy in the world and major gains in terms of energy generation are achievable when turbines are moved offshore. The objective of this project is to propose new design of an offshore wind power platform. Offshore wind turbine (OWT) is ...
full textFluid-structure coupled computations of the NREL 5MW wind turbine blade during standstill
This work is aimed at investigating the aero-elastic behavior of a wind turbine blade subjected to strong wind speeds during standstill. This type of investigation still remains a challenge for most wind turbine simulation codes. For this purpose, a new developed high fidelity framework for fluid-structure coupled computations of wind turbines is presented and numerical simulations are conducte...
full textThe Effect of Additional Mooring Chains on the Motion Performance of a Floating Wind Turbine with a Tension Leg Platform
In this study, two types of floating offshore wind turbine (FOWT) systems were proposed: a traditional tension leg platform (TLP) type and a new TLP type with additional mooring chains. They were both based on the National Renewable Energy Laboratory 5 MW offshore wind turbine model. Taking the coupled effect of dynamic response of the top wind turbine, tower support structure and lower mooring...
full textModel Development and Loads Analysis of a Wind Turbine on a Floating Offshore Tension Leg Platform
NOTICE The submitted manuscript has been offered by an employee of the Alliance for Sustainable Energy, LLC (ASE), a contractor of the US Government under Contract No. DE-AC36-08-GO28308. Accordingly, the US Government and ASE retain a nonexclusive royalty-free license to publish or reproduce the published form of this contribution, or allow others to do so, for US Government purposes. Neither ...
full textIndividual Blade Pitch Control of a Floating Offshore Wind Turbine on a Tension Leg Platform
A disturbance accommodating controller (DAC) to reject wind speed perturbations is applied on a 5MW wind turbine mounted on a tension leg platform (TLP). Multi-blade coordinate (MBC) transformation is used to address the periodicity of the floating wind turbine system. A method to apply DAC after applying MBC transformation is developed and several implementation options are presented. Simulati...
full textMy Resources
Journal title
volume 6 issue 1
pages 8- 14
publication date 2019-02-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023