Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell

Authors

  • Aida Karimi School of Chemical Engineering, Iran University of Science and Technology, Narmak, Tehran 16846-13114, Iran
  • Milad Shakouri Kalfati School of Chemical Engineering, Iran University of Science and Technology, Narmak, Tehran 16846-13114, Iran
  • Soosan Rowshanzamir Green Research Center (GRC) & School of Chemical Engineering (SChE); Iran University of Science & Technology, Tehran, Iran
Abstract:

Sulfonated polyether ether ketone (SPEEK) is categorized in a nonfluorinated aromatic hydrocarbon proton exchange membrane (PEM) group and considered as a suitable substitute for common per-fluorinated membranes, such as Nafion, due to wider operating temperature, less feed gas crossover, and lower cost. Since modeling results in a better understanding of a phenomenon, in this study a dynamic one-dimensional model of the membrane electrode assembly (MEA) of this membrane is developed. The model includes both gas and electrolyte phases. Species transfer by diffusion and convection in an intra-phase and interphases space and participate in electrochemical reactions. The catalyst layers are modeled in detail with catalyst agglomerates covered with a layer of electrolyte and feed gas transfers into the electrolyte phase by Henry’s low. Then the gas diffuses to the catalyst surface on which it reacts electrochemically. The polarization curve of this MEA obtained from the model is validated against experimental data and shows acceptable agreement. Concentration profiles in the MEA both in the gas and electrolyte phase with time are also presented as results.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

An analytic model of membrane humidifier for proton exchange membrane fuel cell

An essential requirement for an operating PEM fuel cell is providing proper water content in the membrane. To avoid water flooding an appropriate water balance is required. Here, an analytic model of a planar membrane humidifier for PEM fuel cell is proposed where the effect of dimensional parameters includes membrane thickness, membrane area and channel hydraulic diameter are investigated. A N...

full text

Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell

An electrochemical analysis on a single channel PEM fuel cell was carried out by Computational Fuel Cell Dynamics (CFCD). The objective was to assess the latest developments regarding the effects of change in the current collector materials, porosity of electrodes and gas diffusion layer on the fuel cell power density. Graphite, as the most applicable current collector material, was applied fol...

full text

The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell

In this article, one-phase and three dimensional computational fluid dynamics analysis was utilized to investigate the effect of annular field pattern of proton exchange membrane fuel cells (PEMFC) with different geometry on the performances and species distribution. This computational fluid dynamics code is used for solving the equation in single domain namely the flow field, the mass conserva...

full text

Three Dimensional Computational Fluid Dynamics Analysis of a Proton Exchange Membrane Fuel Cell

A full three-dimensional, single phase computational fluid dynamics model of a proton exchange membrane fuel cell (PEMFC) with both the gas distribution flow channels and the Membrane Electrode Assembly (MEA) has been developed. A single set of conservation equations which are valid for the flow channels, gas-diffusion electrodes, catalyst layers, and the membrane region are developed and numer...

full text

Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications

Sulfonated poly (ether ether ketone) (SPEEK) with a low degree of sulfonation (DS = 40%) was prepared for proton exchange membrane fuel cells (PEMFC). Poly (ether ether ketone) (PEEK) was sulfonated in concentrated H2SO4 under N2 atmosphere and characterized by the hydrogen nuclear magnetic resonance (H-NMR) technique. After preparation of the SPEEK polymer, the obtained polymer was dissolved i...

full text

an analytic model of membrane humidifier for proton exchange membrane fuel cell

an essential requirement for an operating pem fuel cell is providing proper water content in the membrane. to avoid water flooding an appropriate water balance is required. here, an analytic model of a planar membrane humidifier for pem fuel cell is proposed where the effect of dimensional parameters includes membrane thickness, membrane area and channel hydraulic diameter are investigated. a n...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 4  issue 3

pages  219- 230

publication date 2018-01-02

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023