Durability of Self-compacting Lightweight Aggregate Concretes (LWSCC) as Repair Overlays
Authors
Abstract:
For rehabilitation of damaged concrete structures, the durability of repair overlay is a very important issue. Self-compacting concretes (SCC) are known as a suitable repair overlay materials. In this study, the durability of different self-compacting lightweight aggregate concretes (LWSCC) and effect of lightweight aggregate type on them is investigated. 3 mix designs of LWSCC containing three different types of lightweight aggregates and a conventional self-compacting concrete were considered. The Rapid chloride permeability tests (RCPT), Rapid chloride migration tests (RCMT) and Accelerated corrosion tests (ACT) were performed and the Chloride migration coefficients were obtained. The corrosion resistance of the mix designs was investigated and compared. The classification of the concrete resistance against chloride penetration for all lightweight Mixes were acceptable but concrete with Leca and Pumice had the best and the worst performance respectively. As a result of using lightweight aggregates, using Scoria aggregate may cause better protection to steel reinforcement against corrosion than Leca and Pumice aggregate.
similar resources
A study on strength and durability of self-compacting concretes made of recycled aggregates
Given the development of construction industry and design and implementation of high rise buildings with complex sections and various geometrical forms, the use of self-compacting concretes has received the attention of construction engineers and provided great advantages. Due to the increasing air pollution in cities, governments encounter the important issue of repelling the pollutants in whi...
full text2 Lightweight - Aggregate Concretes in Compression
One research field in Leipzig deals with the design of high strength lightweight-aggregate concretes (HSLWAC). Due to the huge waveband of this concretes with all possible combinations of lightweight-aggregates and mortar matrix the formulation of general rules is difficult. Therefore both components lightweight-aggregates and mortar matrix will be investigated in detail in order to achieve a d...
full textExperimental Investigation of the Effect of Manufactured Sand and Lightweight Sand on the Properties of Fresh and Hardened Self-Compacting Lightweight Concretes
Self-compacting lightweight concrete (SCLC) is a promising construction material for building applications, but most SCLCs today are made with river sand (RS). There is an increasing demand for environmental protection, as well as materials with a high strength/density ratio. The manufactured sand (MS) and lightweight sand (LS) as fine aggregates in cement-based composite materials have been re...
full textUsing Waste Marbles in Self Compacting Lightweight Concrete
Abstract—In this study, the effects of waste marbles as aggregate material on workability and hardened concrete characteristics of self compacting lightweight concrete are investigated. For this purpose, self compacting light weight concrete are produced by waste marble aggregates are replaced with fine aggregate at 5%, 7.5%, and 10% ratios. Fresh concrete properties, slump flow, T50 time, V fu...
full textScaling resistance of high performance concretes containing a small portion of pre-wetted lightweight fine aggregate
The subject of the investigation was the influence of pre-wetted lightweight aggregate on damage of the concrete surface due to cyclic freezing and thawing in the presence of de-icing salts tested according to the Swedish Standard SS 13 72 44 (the Borås method). Six series of concrete specimens were made with the same water/binder (w/b) ratio 0.32, cement volume 400 kg/m and content of superpla...
full textDynamic Fracture Behavior of Steel Fiber Reinforced Self-Compacting Concretes (SFRSCCs)
Three-point bending tests on notched beams of three types of steel fiber-reinforced self-compacting concrete (SFRSCC) have been performed by using both a servo-hydraulic machine and a drop-weight impact instrument. The lo ading rates had a range of six orders of magnitude from 2.20 × 10-3 mm/s (quasi-static) to 2.66 × 10³ mm/s. These SFRSCCs had the same matrix, but various types of steel fiber...
full textMy Resources
Journal title
volume 5 issue 2
pages 96- 108
publication date 2017-08-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023