Dual Fuelling of a Direct Injection Automotive Diesel Engine by Diesel and Compressed Natural Gas
Authors
Abstract:
Application of Compressed Natural Gas (CNG) in diesel engines has always been important, especially in the field of automotive engineering. This is due to easy accessibility, better mixing quality and good combustion characteristics of the CNG fuel. In this study the application of CNG fuel along with diesel oil in a heavy duty direct-injection automotive diesel engine is experimentally investigated. In order to convert a diesel engine into a diesel-gas one, the so called "mixed diesel-gas" approach has been used and for this purpose a carburetted CNG fuel system has been designed and manufactured. For controlling quantity of CNG, the gas valve is linked to the diesel fuel injection system by means of a set of rods. Then, the dual-fuel system is adjusted so that, at full load conditions, the quantity of diesel fuel is reduced to 20% and 80% of its equivalent energy is substituted by CNG fuel. Also injection pressure of pilot jet is increased by 11.4%. Performance and emission tests are conducted under variation of load and speed on both diesel and diesel-gas engines. Results show that, with equal power and torque, the diesel-gas engine has the potential to improve overall engine performance and emission. For example, at rated power and speed, fuel economy increases by 5.48%, the amount of smoke decreases by 78%, amount of CO decreases by 64.3% and mean exhaust gas temperature decreases by 6.4%
similar resources
Dual-Fuelling of a Direct-Injection Automotive Diesel Engine by Diesel-Gas Method
Use of liquefied petroleum gas (LPG) in compression-ignition (C-I) engines has always been considered important in the diesel engineering field. This is due to its easy accessibility and good combustion characteristics. In this paper the application of LPG fuel along with diesel oil in a direct- injection automotive diesel engine is experimentally investigated. In order to convert the pure dies...
full textPrediction of Major Pollutants Emission in Direct-Injection Dual-Fuel Diesel And Natural-Gas Engines
The dual-fuel diesel engine (D.F.D.E) is a conventional diesel engine in which much of the energy released, hence power, comes from the combustion of gaseous fuel such as natural gas. The exhaust emission characteristics of the D.F.D.E needs further refinements, particularly in terms of reduction of Unburnt Hydrocarbons (U7HC) and Carbon Monoxide (CO) emission, because the concentration of thes...
full textPerformance and Exhaust Gas Emissions Analysis of Direct Injection Cng-diesel Dual Fuel Engine
Existing diesel engines are under stringent emission regulation particularly of smoke and particulate matter in their exhaust. Compressed Natural Gas and Diesel dual fuel operation is regarded as one of the best ways to control emissions from diesel engines and simultaneously saving petroleum based diesel fuel. Dual fuel engine is a conventional diesel engine which burn either gaseous fuel or d...
full textDirect Injection of Natural Gas/Liquid Diesel Fuel Sprays
Dual-fuelling provides a suitable method for operating compression-ignition engines on alternative fuels. The CFD package Fluent is being used to model the direct-injection of two such fuels simultaneously into an engine. The CFD models have been initially calibrated using high-speed photographic visualisation of the jets. Different orientations and staging of the jets with respect to each othe...
full textEffect of Direct Injection Diesel Engine Convert to Sequential Injection CNG Engine in Intake Port Gas Flow Pressure Profile
The one dimension computational model of a sequential injection engine, which runs on compressed natural gas (CNG) with spark ignition, is developed for this study, to simulate the performance of gas flow pressure profile, under various speed conditions. The computational model is used to simulate and study of the steady state and transient processes of the intake manifold. The sequential injec...
full textThree-Dimensional Modeling of Combustion Process, Soot and NOx formation In a Direct-injection Diesel Engine
This paper is presented to study the combustion process and emissions in a direct injection diesel engine. Computations are carried out using a three-dimensional model for flows, sprays, combustion and emissions in Diesel engines. Interactions between combustion and emissions with flow field are considered and it is shown that soot mass fraction increases at regions with low turbulence inten...
full textMy Resources
Journal title
volume 13 issue 3
pages 51- 58
publication date 2000-08-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023