Development of Semi-Tow-Dimensional SDAR Model for Bed Variation Simulation in Alluvial Rivers
Authors
Abstract:
In this paper, development of a semi-two- dimensional mathematical model called SDAR is introduced. The model is composed of two principal modules of hydraulics and sediment transport. The newly developed SDAR model has a number of capabilities including determination of sediment transport rate, aggradation - degradation calculation, longitudinal profile and lateral cross–sectional variation simulation, and tracing armor layer development phenomena. SDAR is a semi- two dimensional ( S-2D) model, in the sense that the lateral variation of velocity, shear stress, and rate of sediment transport are achieved by subdividing the channel course into several stream tubes carrying equal discharges. Sediment routing and bed variation calculations are accomplished along each stream tube designated by virtual interfaces.
similar resources
development of analytical model on determination of stable hydraulic geometry of alluvial gravel bed rivers
modeling the hydraulic geometry of gravel rivers is of intrest to hydraulic engineers, hydrologists and enviromental scientists who are engaged in predicting the adjustments of an alluvial channel to an altered upstream runoff or sediment supply. the widely used qualitative and regime models, while indicating the general direction of river adjustment, are not able to deal with river response at...
full textVariation in the reference Shields stress for bed load transport in gravel-bed streams and rivers
[1] The present study examines variations in the reference shear stress for bed load transport (tr) using coupled measurements of flow and bed load transport in 45 gravel-bed streams and rivers. The study streams encompass a wide range in bank-full discharge (1–2600 m/s), average channel gradient (0.0003–0.05), and median surface grain size (0.027–0.21 m). A bed load transport relation was form...
full textDownstream hydraulic geometry of alluvial rivers
This article presents a three-level approach to the analysis of downstream hydraulic geometry. First, empirical concepts based on field observations of ‘poised’ conditions in irrigation canals are examined. Second, theoretical developments have been made possible by combining basic relationships for the description of flow and sediment transport in alluvial rivers. Third, a relatively new conce...
full textan application of equilibrium model for crude oil tanker ships insurance futures in iran
با توجه به تحریم های بین المملی علیه صنعت بیمه ایران امکان استفاده از بازارهای بین المملی بیمه ای برای نفتکش های ایرانی وجود ندارد. از طرفی از آنجایی که یکی از نوآوری های اخیر استفاده از بازارهای مالی به منظور ریسک های فاجعه آمیز می باشد. از اینرو در این پایان نامه سعی شده است با استفاده از این نوآوری ها با طراحی اوراق اختیارات راهی نو جهت بیمه گردن نفت کش های ایرانی ارائه نمود. از آنجایی که بر...
development and implementation of an optimized control strategy for induction machine in an electric vehicle
in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...
15 صفحه اولMy Resources
Journal title
volume 23 issue 1
pages 123- 145
publication date 2004-07
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023