Designing vibrating mode controllers for first degree freedom nonlinear structures
author
Abstract:
The occurrence of catastrophic earthquakes necessitates further researches in the structure engineering for retrofitting construction structures. In this paper, the application of the active control in the structures’ seismic response has been addressed. A single degree of freedom nonlinear structure has been studied. The nonlinear dynamic of the structure is considered in which, the nonlinear part of the dynamic is modeled by Bouc-Wen model. The sliding mode controller is used to stabilize the system. The results show the effectiveness of the proposed method.
similar resources
Sliding Mode Control for Single-degree-of-freedom Nonlinear Structures
The occurrence of catastrophic earthquakes necessitates further researches in the structure engineering for retrofitting construction structures. In this paper, the application of the active control in the structures’ seismic response has been addressed. A single degree of freedom nonlinear structure has been studied. The nonlinear dynamic of the structure is considered in which, the nonlinear ...
full textTwo-Degree-of-Freedom PID Controllers Structures
As in most of the existing industrial process control applications, the desired value of the controlled variable, or set-point, normally remains constant (regulatory control or disturbance rejection operation) but needs to be changed (servo-control or setpoint tracking operation) we are mainly interested in the two-degree-of-freedom (2DoF) implementation of the PID control algorithms. The extra...
full textTwo-degree-of-freedom Multirate Controllers for Nonlinear Processes
This work focuses on developing nonlinear multirate model algorithmic controllers for nonlinear processes using a closed-loop observer. Conditions for the observer function and a gain corrector function, which is necessary to ensure that the resulting control structure has integral action, are given. The control action is calculated using the corrected states. The resulting structure is a two-d...
full textOPTIMUM WEIGHTED MODE COMBINATION FOR NONLINEAR STATIC ANALYSIS OF STRUCTURES
In recent years some multi-mode pushover procedures taking into account higher mode effects, have been proposed. The responses of considered modes are combined by the quadratic combination rules, while using the elastic modal combination rules in the inelastic phases is not valid. Here, an optimum weighted mode combination method for nonlinear static analysis is presented. Genetic algorithm is ...
full textNovel Tuning Strategy for Two-Degree-of-Freedom PI Controllers
In this paper, a new tuning procedure for PI controllers in Two-Degree-of-Freedom (2DOF) structure is proposed. In design procedure, First Order plus Dead Time (FOPDT) model is used. The aim is to have good set point tracking and disturbance rejection and also maximum robustness to model uncertainties. The tuning strategy is based on using analytical rules and some conceptual rules about closed...
full textDynamic testing of nonlinear vibrating structures using nonlinear normal modes
ll rights reserved. +3243669505. s), [email protected] (G. Kerschen), [email protected] (J.C. Golinval). Finite element model ̈ M x (t)+ Kx (t) + fnl {x (t)} = 0 0 2 4 6 8 10 −100 −50 0 50 100 Time (s) A cc . ( m /s 2 ) Numerical NNM computation Experimental NNM extraction NNM frequencies NNM modal curves Experimental response (time series) Fig. 1. Theoretical and experimental nonlinear m...
full textMy Resources
Journal title
volume 7 issue 28
pages 37- 41
publication date 2019-03-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023