Designing a new robust control for virtual inertia control in the microgrid with regard to virtual damping
Authors
Abstract:
Background and Objectives: Virtual inertia control, as a component of a virtual synchronous generator, is used for the implementation of synchronous generator behaviour in microgrids. In microgrids that include high-capacity distributed generation resources, in addition to virtual inertia, virtual damping can also lead to improvement of frequency stability of the microgrid. The purpose of the control method for the islanded microgrid is to be: 1) robust to the uncertainty of the microgrid parameters. 2) Weaken the disturbances on the islanded microgrid (wind turbine, solar cell, Loads). 3) Improved response speed related to microgrid frequency deviation (reduced settling time). Methods In this paper, designing a new robust control method for controlling virtual inertia in microgrids, with regard to virtual damping, has been attempted. The proposed method has a higher degree of freedom compared to the conventional robust controllers, which provides better control of the system. Results: Results of the proposed method for virtual inertia control with regard to virtual damping has been compared in several scenarios –with virtual inertia control based on optimized PI controllers with regard to virtual damping, virtual inertia control based on model predictive control (controller) with regard to virtual damping,Self-adaptive virtual inertia control using fuzzy logic, virtual inertia control with regard to virtual damping, and virtual inertia control without virtual damping (conventional methods). Compared to other control methods, the proposed controller has improved the settling time due to the frequency deviations of the islanded microgrid by 27%. According to the results of the scenarios, the proposed controller has been able to reduce the frequency error due to load and distributed generation resource disturbances and compared to other controllers, and this frequency deviation has been reduced by 68%. Conclusion: According to the simulation results, the proposed controller has a better performance than other controllers in improving the frequency stability of the islanded microgrid.
similar resources
Coordinated Control of Doubley Fed Induction Generator Virtual Inertia and Power System Oscillation Damping Using Fuzzy Logic
Doubly-fed induction generator (DFIG) based wind turbines with traditional maximum power point tracking (MPPT) control provide no inertia response under system frequency events. Recently, the DFIG wind turbines have been equipped with virtual inertia controller (VIC) for supporting power system frequency stability. However, the conventional VICs with fixed gain have negative effects on inter-ar...
full textDesigning and Creating a Virtual Reality Environment and a Wearable Glove with Control and Evaluation Capability to Rehabilitate Patients
Introduction: Using modern technologies like virtual reality in rehabilitation can promise a great movement in medical sciences as sometimes, these technologies shorten the path of reaching the goal. In the present study, a virtual reality environment with the ability of physical interaction was designed to test and measure the hand motion, and a sample of electronic equipment was presented alo...
full textDesigning and Creating a Virtual Reality Environment and a Wearable Glove with Control and Evaluation Capability to Rehabilitate Patients
Introduction: Using modern technologies like virtual reality in rehabilitation can promise a great movement in medical sciences as sometimes, these technologies shorten the path of reaching the goal. In the present study, a virtual reality environment with the ability of physical interaction was designed to test and measure the hand motion, and a sample of electronic equipment was presented alo...
full textA New Control Strategy for Controlling Isolated Microgrid
Microgrid control in isolated mode is a highly important subject area. In the present paper, a new method is used for controlling the isolated microgrids. This method was used based on the classification of the microgrids into two groups, namely fast-dynamic (battery and flywheel) and slow-dynamic (diesel generator, electrolyzer, fuel cell). For the microgrid components with fast dynamics, a se...
full textAalborg Universitet A Virtual Inertia Control Strategy for DC Microgrids Analogized with Virtual Synchronous Machines
In a DC microgrid (DC-MG), the dc bus voltage is vulnerable to power fluctuation derived from the intermittent distributed energy or local loads variation. In this paper, a virtual inertia control strategy for DC-MG through bidirectional grid-connected converters (BGCs) analogized with virtual synchronous machine (VSM) is proposed to enhance the inertia of the DC-MG, and to restrain the dc bus ...
full textA new control strategy for SSSC to improve low-frequency oscillations damping
When power systems are expanded and connected together with weak tie lines, the low-frequency oscillations are increased and the stability margin of the power system decreases. Therefore, when designing the transmission system to be used, it is necessary to maintain the dynamic stability of the power system, and to make sure to have the most possible stability margin. SSSC is a FACTS device con...
full textMy Resources
Journal title
volume 8 issue 1
pages 53- 70
publication date 2019-12-20
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023