Designing a Genetic-Fuzzy Anti-Lock Brake System Controller (RESEARCH NOTE)
Authors
Abstract:
This article doesn't have abstract
similar resources
Hydraulic anti-lock, anti-skid braking system using fuzzy controller
To maintain the stability trajectory of vehicles under critical driving conditions, anti lock-anti skid controllers, consisting of four anti-lock sub-controllers for each wheel and two anti-skid sub-controllers for left and right pair wheels have been separately designed. Wheel and body systems have been simulated with seven degrees of freedom to evaluate the proper functioning of controllers. ...
full textFuzzy-based PID with Iterative Learning Active Force Controller for An Anti-lock Brake System
Anti-lock braking systems (ABS) are safety and control devices implemented in ground vehicles that prevent the wheel lock-up during panic braking. The existing ABS controls have the ability to regulate the level of pressure to optimally maintain the wheel slip within the vehicle stability range. However, the ABS shows strong nonlinear characteristics in which the vehicles equipped with the exis...
full textoptimal type-2 fuzzy controller for anti-lock braking systems
anti-lock braking system (abs) is a nonlinear and time varying system including uncertainty, so it cannot be controlled by classic methods. intelligent methods such as fuzzy controller are used in this area extensively; however traditional fuzzy controller using simple type-1 fuzzy sets may not be robust enough to overcome uncertainties. for this reason an interval type-2 fuzzy controller is de...
full textA Genetic based Neuro-Fuzzy Controller System
Recently, the mobile robots have great importance in the manufacturing processes. They are widely used for assembling processes, handling the dangerous components, moving the weighted things, etc. Designing the controller of the mobile robot is a very complex task. Many simple control systems used the neuro-fuzzy controller in the mobile robots. But, they faced with great complexity when moving...
full textModular design and testing for anti-lock brake actuation and control using a scaled vehicle system
A unique decoupling feature in frictional disk brake mechanisms, derived through kinematic analysis, enables modularised design of an Anti-lock Braking System (ABS) into a sliding mode system that specifies reference brake torque and a tracking brake actuator controller. Modelling of brake actuation, vehicle dynamics, and control design are described for a scaled vehicle system. The overall con...
full textRedundancy Allocation Problem of a System with Three-state Components: A Genetic Algorithm (RESEARCH NOTE)
The redundancy allocation is one of the most important and useful problems in system optimization, especially in electrical and mechanical systems. The object of this problem is to maximize system reliability or availability within a minimum operation cost. Many works have been proposed in this area so far to draw the problem near to real-world situations. While in classic models the system com...
full textMy Resources
Journal title
volume 18 issue 2
pages 197- 205
publication date 2005-05-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023