Design of optimal central guidance of an underwater vehicle in the modeled ship wake
Authors
Abstract:
The purpose of this paper is to provide a new algorithm for guidance of an underwater vehicle to reach its target, and demonstrate its effectiveness by simulation with a computer code. The meant of target in here is to chase a ship on the surface of the water. In order to do this, one of the most effective methods is to follow the ship wake which produced behind it. Disadvantages of wake guidance can be mentioned as zigzag motion for rediscovering the wake in its path which according to the decreasing linear speed of approaching the target, sometime it doesn't reach the target and collision fails. Therefore various ideas, with both positive and negative aspects, have been introduced to improve movement in the wake path. In this paper, a new guidance algorithm for running an underwater vehicle at the center of wake, which is named central guidance, is introduced that results an optimal path that by using geometric bases, determining the center of the wake in guidance phase like a central line. Then, using the optimal least effort method, the path to central line is presented. Also, to test this method, the wake of a ship is modelled and programed and its code is used in the guidance program to simulate the performance of this method.
similar resources
OPTIMIZED FUZZY CONTROL DESIGN OF AN AUTONOMOUS UNDERWATER VEHICLE
In this study, the roll, yaw and depth fuzzy control of an Au- tonomous Underwater Vehicle (AUV) are addressed. Yaw and roll angles are regulated only using their errors and rates, but due to the complexity of depth dynamic channel, additional pitch rate quantity is used to improve the depth loop performance. The discussed AUV has four aps at the rear of the vehicle as actuators. Two rule bases...
full textdevelopment and implementation of an optimized control strategy for induction machine in an electric vehicle
in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...
15 صفحه اولthe role of russia in transmission of energy from central asia and caucuses to european union
پس ازفروپاشی شوروی،رشد منابع نفت و گاز، آسیای میانه و قفقاز را در یک بازی ژئوپلتیکی انرژی قرار داده است. با در نظر گرفتن این منابع هیدروکربنی، این منطقه به یک میدانجنگ و رقابت تجاری برای بازی های ژئوپلتیکی قدرت های بزرگ جهانی تبدیل شده است. روسیه منطقه را به عنوان حیات خلوت خود تلقی نموده و علاقمند به حفظ حضورش می باشد تا همانند گذشته گاز طبیعی را به وسیله خط لوله مرکزی دریافت و به عنوان یک واس...
15 صفحه اولthe place of iranian public diplomacy in central asia
چکیده: نسبت به کارکرد و ماهیت دیپلماسی عمومی در جهان امروز نظریه های متعددی بیان گردیده و جایگاه آن در کنار نظریه های دیگر در محافل آکادمیک و دانشگاهی بررسی و تحلیل گردیده است. نظر به اهمیت دیپلماسی عمومی و جایگاه آن در سیاست خارجی ایران این نوشتار با تمرکز بر دیپلماسی عمومی در منطقه آسیای مرکزی تهیه و تنظیم شده است. این ضرورت از آنجا ناشی می شود که اولاً مفهوم دیپلماسی عمومی در سیاست خارجی ای...
15 صفحه اولpolitical economy of china in central asia
this research is about the political economy of china in central asia. in this research the political & economic interactions affected on chinas political economy in central asia are examined. chinas goal of presence in central asia including political-security, economic and energy goals is described in one part. in another part, the trade relations between china and central asian countries ar...
15 صفحه اولMy Resources
Journal title
volume 14 issue 2
pages 17- 25
publication date 2020-06
By following a journal you will be notified via email when a new issue of this journal is published.
No Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023