Design of Maximum Power Point Tracking in Solar Array Systems Using Fuzzy Controllers

Authors

  • Marjaneh Hashemi Electrical Engineering Department, Islamic Azad University Central Tehran Branch, Tehran, Iran.
Abstract:

In recent year's renewable energy sources have become a useful alternative for the power generation. The power of photovoltaic is nonlinear function of its voltage and current. It is necessary to maintain the operation point of photovoltaic in order to get the maximum power point (MPP) in various solar intensity. Fuzzy logic controller has advantage in handling non-linear system. Maximum power point trackers are so important in photovoltaic systems to increase their efficiency. Many methods have been proposed to achieve the maximum power that the PV modules. This paper proposed an intelligent method for MPPT based on fuzzy logic controller. The system consists of a photovoltaic solar module connected to a DC-DC Boost converter and the fuzzy logic controller for controlling on/off time of MOSFET switch of a boost converter. The proposed MPPT controller for grid-connected photovoltaic system is tested using model designed by Matlab/Simulink program. Comparison of different performance parameters such as: tracking efficiency and response time of the system shows that the proposed method gives higher efficiency and better performance than the conventional perturbation and observation method.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

design of maximum power point tracking in solar array systems using fuzzy controllers

in recent year's renewable energy sources have become a useful alternative for the power generation. the power of photovoltaic is nonlinear function of its voltage and current. it is necessary to maintain the operation point of photovoltaic in order to get the maximum power point (mpp) in various solar intensity. fuzzy logic controller has advantage in handling non-linear system. maximum power ...

full text

Maximum Power Point Tracking Using Sliding Mode Control for Photovoltaic Array

In this paper, a robust Maximum Power Point Tracking (MPPT) for PV array has been proposed using sliding mode control by defining a new formulation for sliding surface which is based on increment conductance (INC) method. The stability and robustness of the proposed controller are investigated to load variations and environment changes. Three different types of DC-DC converter are used in Maxim...

full text

Increasing the Efficiency of Photovoltaic Systems by Using Maximum Power Point Tracking (MPPT)

Using Photovoltaic systems is gradually expanded by increasing energy demand. Abundance and availability of this energy, has turned to one of the most important sources of renewable energy. Unfortunately, photovoltaic systems have two big problems: first, those have very low energy conversion efficiency (in act between 12 and 42 percent under certain circumstances). Second, the power produced b...

full text

Maximum Power Point Tracking of Wind Energy Conversion System using Fuzzy- Cuckoo Optimization Algorithm Strategy

Nowadays the position of the renewable energy is so important because of the environment pollution and the limitation of fossil fuels in the world. Energy can be generated more and more by the renewable sources, but the fossil fuels are non-renewable. One of the most important renewable sources is the wind energy. The wind energy is an appropriate alternative source of fossil fuel. The replacem...

full text

General Overview of Maximum Power Point Tracking Methods for Photovoltaic Power Generation Systems

Maximum power point tracking controller is essential to obtain the maximum power from a solar array in the photovoltaic systems as the PV power module varies with the temperature and solar irradiation. In this paper, several methods for the MPPT of the PV systems are discussed and it can to be used as a Helpful reference for the upcoming MPPT user in the PV applications.

full text

A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System

In this paper, we present a modeling and implementation of new control schemes for an isolated photovoltaic (PV) using a fuzzy logic controller (FLC). The PV system is connected to a load through a DC-DC boost converter. The FLC controller provides the appropriate duty cycle (D) to the DC-DC converter for the PV system to generate maximum power. Using FLC controller block in MATLABTM/Simulink e...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 02  issue 4

pages  237- 244

publication date 2013-09-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023