Design and Practical Implementation of a New Markov Model Predictive Controller for Variable Communication Packet Loss in Network Control Systems

Authors

  • Babak Roshanipour Department of Instrumentation and Industrial Automation, Petroleum University of Technology, Ahwaz, Iran
  • Iman Karimi Tehran Petroleum Research Center, Petroleum University of Technology, Tehran, Iran
  • Karim Salahshoor Department of Instrumentation and Industrial Automation, Petroleum University of Technology, Ahwaz, Iran
Abstract:

The current paper investigates the influence of packet losses in network control systems (NCS’s) using the model predictive control (MPC) strategy. The study focuses on two main network packet losses due to sensor to controller and controller to actuator along the communication paths. A new Markov-based method is employed to recursively estimate the probability of time delay in controller to actuator path and a generalized predictive control (GPC) method is proposed to compensate the effect of big network time-delay, which leads to packet loss. The proposed methods and algorithms have been evaluated using a practical Smar fieldbus pilot plant to judge the efficiency of the foregoing algorithms. The obtained results clearly demonstrate the superiorities of the proposed control scheme with respect to standard MPC algorithm.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Design and implementation of a model predictive controller for the COVID-19 spread restraint in Iran

 In this paper, a model is proposed based on the different levels of social restrictions for the COVID-19 spread restraint in Iran. Also, a Genetic Algorithm (GA) identifies parameters of model using reported main data from the Iranian Ministry of Health and simulated data based on proposed model. Whereas Model Predictive Control (MPC) is a popular method which has been widely used in process ...

full text

development and implementation of an optimized control strategy for induction machine in an electric vehicle

in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...

15 صفحه اول

investigating the feasibility of a proposed model for geometric design of deployable arch structures

deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...

Robust Model for Networked Control System with Packet Loss

The Networked Control System in modern control widely uses to decrease the implementation cost and increasing the performance. NCS in addition to its advantages is inevitable. Nevertheless they suffer of some limitations and deficiencies. Packet loss is one of the main limitations which affect the control system in different conditions and finally may lead to system instability. For this reason...

full text

Networked Robust Predictive Control Systems Design with Packet Loss

The paper addresses problem of designing a robust output feedback model predictive control for uncertain linear systems over networks with packet-loss. The packet-loss process is arbitrary and bounded by the control horizon of model predictive control. Networked predictive control systems with packet loss are modeled as switched linear systems. This enables us to apply the theory of switched sy...

full text

THE STUDY OF PACKET LOSS EFFECT ON NETWORK CONTROL SYSTEM ERROR FUNCTION MODEL

Modern control systems widely use network to decrease the implementation cost and also increase the performance. Although they have several advantages, they suffer from some limitations and deficiencies. Packet loss is one of the main limitations which affect the control system in different conditions and finally can lead to system instability. To prevent such problems it is important to model ...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 5  issue 1

pages  53- 64

publication date 2016-01-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023