Degradation of aqueous solution of 4-Chloro-2-Nitrophenol in nano-TiO2/H2O2 system

Authors

  • A. Mirzaee M.Sc. student, Department of chemistry, Ahar Branch, Islamic Azad University, Ahar, Iran.
  • P. Gharbani 2Department of chemistry, Ahar Branch, Islamic Azad University, Ahar, Iran.
Abstract:

              The present work is focused on the degradation of 4-chloro-2-nitrophenol in aqueous solution containing nano titanium dioxide, hydrogen peroxide and the combination of nano-TiO2/H2O2. The effect of experimental parameters, such as the amount of nano- TiO2 concentration of H2O2, initial concentration of 4-chloro-2-nitrophenol and pH on the reaction was investigated. Experimental data obtained under different conditions describe the dependency of degradation rate on the above mentioned parameters. The optimum conditions of the degradation treatment were: [H2O2]=100 mg/L;  [nano- TiO2]=0.004 g/250 mL; initial pH=10 and initial 4-chloro-2-nitrophenol concentration=15 mg/L. Consequently, kinetic parameters were experimentally determined and a pseudo-first-order kinetic was observed.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

degradation of aqueous solution of 4-chloro-2-nitrophenol in nano-tio2/h2o2 system

the present work is focused on the degradation of 4-chloro-2-nitrophenol in aqueous solution containing nano titanium dioxide, hydrogen peroxide and the combination of nano-tio2/h2o2. the effect of experimental parameters, such as the amount of nano- tio2 concentration of h2o2, initial concentration of 4-chloro-2-nitrophenol and ph on the reaction was investigated. experimental data obtained un...

full text

Adsorption of 4-Chloro-2-nitrophenol onto Nano-ZnO

Nano-ZnO was employed for the adsorption of 4C2NP from aqueous solutions in batch equilibriumexperiments to investigate its adsorption properties. The quantity of 4C2NP adsorbed onto nano- ZnOsurface was measured by UV-Vis spectrophotometer. The effects of contact time, adsorbent dose, pH, andinitial concentration of 4C2NP were investigated. The adsorption found to be strongly influenced by all...

full text

The Effect of pH on Nanosized ZnO Catalyzed Degradation of 4-Chloro-2-Nitrophenol via Ozonation

This research evaluates the efficiency of nanosized ZnO in the catalytic ozonation of 4-chloro-2-nitrophenol and determines the effect of pH on heterogeneous catalytic ozonation. The combined use of ozone and ZnO catalyst leads to conversion of 98% 4-chloro-2-nitrophenol during 5 min. In addition, it was found that in ZnO catalytic ozonation, the degradation efficiency of 4-chloro-2-nitrophenol...

full text

adsorption of 4-chloro-2-nitrophenol onto nano-zno

nano-zno was employed for the adsorption of 4c2np from aqueous solutions in batch equilibriumexperiments to investigate its adsorption properties. the quantity of 4c2np adsorbed onto nano- znosurface was measured by uv-vis spectrophotometer. the effects of contact time, adsorbent dose, ph, andinitial concentration of 4c2np were investigated. the adsorption found to be strongly influenced by all...

full text

Kinetic and thermodynamic studies of adsorption of 4-chloro-2-nitrophenol on nano- Ti02

Adsorption capacity of 4-chloro-2-nitrophenol (4C2NP) onto nano-Ti02 from aqueous solutions wasinvestigated in a batch system by considering the effects of various parameters like contact time, nano-TiO2 dosage, initial pH and initial 4C2NP concentration. Optimum conditions for 4C2NP adsorptionwere found to be initial pH z 2, nano-TiO2 closer- 0.01 g and equilibrium time 1 h. The adsorptionkine...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 5  issue 1

pages  77- 81

publication date 2014-03-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023